White Rodgers SuperStat Pro SuperStat Pro Programmable Thermostat User Manual page 23

Programming Heating and Cooling
Quick Guide
Press until
setpoint is
flashing.
Press to set
temperature
setpoint.
Repeat Steps 4
through 6.
Repeat Steps 3
through 7.
Press once.
SuperStat Pro User Guide
Step Description
Press the TIME/SET button again. The temperature setpoint
6
for the system will begin to flash. Use the arrow buttons to
set the temperature setpoint.
7 Repeat Steps 4 through 6 until all of the periods have been
set for the selected day.
After programming all of the periods for group of days you
8
initially selected, repeat Steps 3 through 7, selecting
another group of days to program until all 7 days are done.
9
Press the RUN button once to save and exit programming.
Thermostat Display
Temperature will flash:
21