Multiple System Setup
To set up multiple systems, repeat the previous steps for each transmitter and
receiver pair. Once transmitters have been set, leave them on. Be sure to set
each transmitter and receiver pair to a different channel. For information about
frequencies and compatibility, refer to channel guide.
LED Status
LED COLOR
Green
Amber
Red
Flashing Red on startup
Flashing Green and Red
Flashing Amber and Red
AUDIO LED COLOR
Green
Amber
Red
READY DISPLAY COLOR
Green
TRANSMITTER
STATUS
Ready
Mute on
Battery low
Battery is dead
Controls locked
Mute on, battery low
RECEIVER
INDICATES
Normal signal strength
Strong signal
Peak signal
INDICATES
System is ready
Trou
Issue
No sound
faint sound
Distortion
Sound leve
guitar or m
using diffe
Cannot tur
transmitter