Table of Contents
Advertisement
3. Operation:
3.1 Message Downloading - Cassette:
When you receive the new DV-2000 MTS/LR Storecasting system, its memory will be blank.
To load new messages into the DV-2000 MTS/LR's memory, simply insert a pre-recorded, and
properly formatted(Section 6), cassette tape into the DV-2000 MTS/LR unit. Make sure to
insert the tape with the side which audio is on facing toward the top of the machine.
When a new tape is inserted, the DV-2000 MTS/LR will automatically rewind the cassette to
the beginning and start playing it. The DV-2000 MTS/LR will record the audio program(s),
ignoring the silence segments on the cassette. When the Audio program on the tape starts,
the red Record light will come on signifying that Audio is being recorded. At the end of the
Audio program, when the DV-2000 MTS/LR detects 6 seconds of silence, the Record LED will
go out. The system will keep playing the tape while it "looks" for another message on the tape.
If another message exists, the red Record light will go on signifying that another message is
being recorded. When the last message on the tape is recorded, signified by 15 seconds of
silence, the system will automatically rewind the cassette tape.
The DV-2000 MTS/LR system offers two Message Download Modes; Replace All and Replace
and Append. See below for details.
3.1.1 Message Download Mode 1 - Replace All (Replace/Append LED: OFF)
When this mode is used, the system will erase all the messages in memory as soon as
the tape is inserted. The system will begin recording the messages from the cassette
tape into memory starting from message #1 and continuing through the last message on
the tape. Use this mode any time all of the messages on the DV-2000 MTS/LR system
need to be updated.
Important: Once a tape is inserted into the DV-2000 MTS/LR system, in this mode,
all of the messages in memory will be deleted immediately. Even if the tape is then
ejected prior to recording any audio, the DV-2000 MTS/LR's memory will be empty.
3.1.2. Message Download Mode 2: Replace and Append (Replace/Append LED: ON)
This mode allows the user to add or replace any number of messages on the system.
Activate this mode by pressing the Replace/Append button until the Replace/Append
LED lights. Turn ON the message selection switches of the messages to be overwritten.
Make sure to turn OFF the message selection switches of the messages you want saved.
Insert the tape with the new messages on it and the system will rewind the cassette and
start playing it. The first message on the tape will overwrite the first active message,
signified by its message selection switch being ON. The second message will replace
the second active message, and so on.
6
&
DIGITAL AUTOLOAD STORECASTER
MUSIC THRU SYSTEM
DV-2000 MTS/LR SERIES
R
EJECT
REC STOP
MUSIC INT ERVAL
MESSAGE SELECTION
1
2
3
4
5
6
7
8
9
10
APPEND
REPLACE
ON
TENS
ONES
OFF
MIN
EJECT
11
12
13
14
15
16
17
18
19
20
SEC
ON
OFF
REC
PLAY MODE
AUDIO
BGM F ADE
LOCAL
MUSIC ONLY
RECORD
MODE
MUSIC & MESSAGE
SPEAKER
APPEND
MESSAGE ONLY
DOWN
UP
REPLACE
12VDC
_
LEVEL
APHEX
LEVEL
HANDSET
+
BGM IN
LINE OUT
SPKR OUT
INPUT
Figure 2 - Connection
Advertisement
Table of Contents
