Mackenzie DV-2000 MTS/LR Series User Manual page 15

MESSAGE SELECTION
1
Enable and disable messages to be played or
recorded.
EJECT / RECORD STOP PUSH-BUTTON:
This ejects the tape when the system is playing a
2
message. If pressed during the recording process
the recording will be stopped.
APPEND / REPLACE PUSH-BUTTON:
3
Toggles the Append / Replace mode as displayed on
the associated LED.
NO TAPE LED:
Yellow light ON indicates there is no cassette
4
inserted. Yellow light OFF indicates the cassette is
in place.
RECORD LED:
Used to determine tape loading mode. Red light
5
ON, indicates message (s) is being loaded into
memory.
PLAYING LED:
6
This green LED is ON when the system is playing
a Pre-Recorded message.
SPEAKER PUSH-BUTTON:
7
Turns local Monitor ON/OFF.
POWER:
8
Insert supplied power adapter.
BGM LEVEL:
9
Adjusts level of external music source.
BGM INPUT:
10
Connect to external source of music.
The Mackenzie Dynavox
DV-2000 MTS/LR & MTS/LR PRO Quikey
V 1.0 Feb. 24, 2004
Mackenzie Laboratories, Inc.
1163 Nicole CT, Glendora, CA 91740 USA
TEL (909) 394-9007 FAX (909)394-9411
w w w . m a c k l a b s . c o m
8
Model DV-2000 MTS/LR & DV-2000 MTS/LR PRO
DIGITAL AUTOLOAD STORECASTER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
APHEX MIX:
Adjusts the amount of high frequency
11
enhancement necessary to deliver the best
overall system performance.
AUDIO OUTPUT (LINE):
12
Audio output level of up to +4dB into 600 ,
this is a standard level for most applications.
AUDIO OUTPUT (POWER):
Audio output level of up to 1W into 8 ohm. Use this
13
output if more drive is needed to reach a more
comfortable listening level.
LEVEL:
14
Adjusts the volume to the line level
or power audio outputs.
&
MUSIC THRU SYSTEM
21
20
19
18
17
16
15
LOCAL RECORD INPUT:
15
Use with LR-HSET ( optional ) hand set for
local recording.
MONITOR SPEAKER:
16
Allows user to preview message
recording and play back.
BGM FADE UP / DOWN PUSH-BUTTON:
17
Adjusts the Amount the BGM input is
ducked when a message is played.
LOCAL RECORD PUSH BUTTON:
18
Press this button to initiate
local record function
NOTE:
Insert Pre-Recorded tape Cassette as shown ( Tape up,
Facing label ), system will rewind tape then start loading
( Red LED is on ) at the end of downloading the
message (s), the Red LED will turn off, system will
rewind the tape. It will automatically start playing the
message (s) from the digital audio memory Enabled.
REPLACE / APPEND MODE LED:
19
Indicates if system is in Standard mode
(OFF) or Replace & Append mode (ON).
PLAY MODE SWITCH:
UP = music only.
20
MID. = music & message.
DOWN = message only.
MUSIC INTERVAL
MINUTE/SECOND SWITCH: Select
between minute or second mode.
21
TENS AND ONES ROTARY: To set musical interval
between message playing. Set the rotary switches to the
desired time between 00 and 99.
9