List Of Accessories (Europe Only); Scope Of Supply - Weller FT12 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
In order to guarantee trouble-free operation of the unit, the
vacuum tube and extraction hose of the FE soldering bit
must be cleaned regularly. If heavily soiled, the extraction
tube can be placed in a gas-tight sealed container in clea-
ning alcohol (spirit) until the flux residues have dissolved.
Warning:
When using cleaning agents, the legal safety provisions
with regard to their handling must be observed. The cle-
aning agent must be treated as hazardous waste and
must be disposed of in accordance with the prevailing
local regulations.
If the extraction performance of a cleaned FE soldering bit is
no longer adequate, the filters must be checked.
The preliminary filter can be changed several
times before the main filter has to be replaced.
When original WELLER filters are used in the prescribed
manner, the service lives of the particulate filter and the wide
band gas filter are designed to be approximately equal.
To change the filter, the 3 retaining springs (7) must be pus-
hed outwards. The main filter cartridge and the
preliminary filter below it can then be replaced without
the use of tools. The exhaust filter (4) can also be changed.
The exhaust air filter cartridge can then be taken out of the
vacuum casing.
Warning:
When inserting filters, take care to follow the correct
sequence and fit them in the appropriate position. The
soiled filters must be treated as hazardous waste.

4. List of accessories (Europe only)

T005 29 166 99
FE 75 soldering bit 80 W
T005 25 125 99
FE retrofit kit for LR-21
T005 13 125 99
FE retrofit kit for DSX 80
T005 15 020 99
KH-20 rest for soldering bit FE 75
Replacement filters:
210-0323-ESD
Exhaust filter
T005 36 410 99
Compact filter
T005 36 421 99
Fine dust filter F7 (3 pcs.)

5. Scope of supply

The FT12 is equipped with:
1 Fine particulate air filter F7
1 Main filter cartridge consisting of particulate filter and gas
filter 50% activated carbon, 50% Puratex
1 Exhaust air filter
1 PUN 6 x 1 compressed air hose
1 Set of operating instructions
1 Safety information
Subject to technical alterations and amendments!
See the updated operating instructions at
www.weller-tools.com.
English
10

Advertisement

Table of Contents
loading

Table of Contents