Service And Maintenance; Disposal; Accessories; Warranty - Festool RUSTOFIX RAS 180.03 E-HR Original Operating Manual/Spare Parts List

Maintain the speed specifi ed. (see Chapter
7.1)
Use the correct brush for the relevant
working procedure:
Working proce-
dure
Texturing
Intermediate san-
ding
Smoothing
Note
• Do not use the KD 80 brush with plastic
bristles for texturing. The brush is not
suitable for heavy-duty texturing.
• The BG 85 is the only brush suitable for
processing stained or oiled parts. All other
brushes will be damaged.
9 Service and mainte-
nance
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket
before performing any type of work on
the machine.
All maintenance and repair work which
requires the housing to be opened must
only be carried out by an authorised
service workshop.
To ensure constant air circulation, always
keep the ventilation openings clean and free
of blockages.
The machine is equipped with self-discon-
necting special carbon brushes. If they are
worn, power is interrupted automatically
and the machine comes to a standstill (see
Chapter "Electronics").

10 Disposal

Do not throw the power tool in your house-
hold waste! Dispose of the machine, acces-
sories and packaging at an environmentally-
responsible recycling centre! Observe the
valid national regulations.
14
Brush
Rustilon brush LD 85
(standard wire brush)
Rustilon brush KB 80
(plastic bristles)
Rustilon brush BG 85 (si-
sal bristles)
EU only: European Directive 2002/96/EC
stipulate that used electric power tools must
be collected separately and disposed of at
an environmentally responsible recycling
centre.

11 Accessories

Use only original Festool accessories and
Festool consumable material intended for
this machine because these components
are designed specifi cally for the machine.
Using accessories and consumable material
from other suppliers will most likely affect
the quality of your working results and limit
any warranty claims.
Machine wear or your own personal workload
may increase depending on the application.
Protect yourself and your machine, and
preserve your warranty claims by always us-
ing original Festool accessories and Festool
consumable material!
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".

12 Warranty

For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but
in any case for at least 12 months. Within
the EU member states, the warranty period
is 24 months (verifi cation through invoice
or delivery note). Damage caused by the
operator, natural wear, overloading, incor-
rect handling or through the use of the
equipment not specifi ed in the operating
manual, or damage which was known at the
time of purchase, is not covered by the war-
ranty. Furthermore, damage caused by the
use of non-original Festool accessories and
consumable material (e.g. sanding pads)
is also excluded. Complaints can only be
recognised if the tool is returned while still
assembled to the supplier or an authorised
Festool Customer Service workshop. Keep
the operating manual, safety instructions,
spare parts list and purchase receipt in a
safe place. Otherwise the respective, cur-
rent warranty conditions of the manufacturer
shall apply.