Page 3
The specifi ed illustrations are at the begin- ning of this operating manual. RUSTOFIX RAS 180.03 E-HR Machine features [1-1] On/off switch Table of contents [1-2] Switch-on lock Symbols [1-3] LED Technical data [1-4] Speed control Machine features [1-5] Support roller...
Page 4
maximum speed specifi ed on the machine. catch on the storage area, causing you to Accessories that rotate faster than the lose control of the machine. permissible level can rupture. - Never allow the machine to operate while - The outside diameter and the thickness of carrying it at your side.
Page 5
- Never install a chainsaw or saw blades plate. with teeth to cut wood. Such blades often - In North America, only Festool machines cause kickback and loss of control. with a voltage specifi cation of 120 V/60 Hz may be used.
Page 6
After a cooling time of approx. 3-5 minutes, extractor connector [1-7]. The extractor the machine can be operated again at full hose in the Festool extractor is 27 mm in load. The machine requires less time to cool diameter. down when idling.
Page 7
Festool accessories and Festool brushes will be damaged. consumable material! The order numbers of the accessories and Service and mainte- tools can be found in the Festool catalogue or on the Internet under "www.festool.com". nance 12 Warranty WARNING...
Page 8
EN 60 745, EN 55 014, EN 61 000 in ac- cordance with the regulations stipulated in Directives 98/37/EC (until 28 Dec. 2009), 2006/42/EC (from 29 Dec. 2009), 2004/108/EC. Dr. Johannes Steimel Head of research and development Festool GmbH, Wendlingen, Germany...
Need help?
Do you have a question about the RAS 180.03 E-HR and is the answer not in the manual?
Questions and answers