Table Of Contents - Whistler 1000 Owner's Manual

1250/1750/2750 Manual 3/6/02 2:45 PM Page 5

TABLE OF CONTENTS

Topic
Features Summary ..................................................................3-7
Important Information................................................................8
Inverter Information............................................................9 - 11
• Getting Started
• Don't Push It
Battery Information...........................................................11 - 13
• Selecting the Optimum Power Source
Cable Information.............................................................13 - 14
• Wire Cable Gauges
Operation..........................................................................15 - 23
• Making the Connection
• Tips
• Recharging Equipment
• Power Source
• TV's & Microwaves
Technical Operating Principles........................................23 - 25
Operation Summary .........................................................25 - 27
Troubleshooting................................................................28 - 29
Specifications............................................................................30
Warranty Information........................................................31 - 33
Page
2
WHISTLER FEATURES
A Word About Whistler Power Inverters
Whistler inverters convert low voltage, direct current (DC)
to 110 volt alternating household current (AC). The AC
output is called "modified sine wave". See "Technical
Operating Principles" section for more inform a t i o n .
Depending on the model and its rated capacity, Whistler
inverters draw power either from standard 12 volt automo-
bile and marine batteries or from portable high power 12
volt sources.
Inverter Features
1000 watt series shown
a). ON/OFF Switch. This switch controls the flow of power
from the power source to the inverter. It does not control
the power running from the inverter to the equipment or
appliance being operated.
b). High Temperature LED Indicator Light. This light will
turn RED and the inverter will automatically shut down
when the internal temperature exceeds design parameters
3