Fitbit Zip Alta Manual

Hide thumbs Also See for Alta:

How do I charge my tracker?

We recommend plugging your charging cable into a USB port on your computer or other low-

energy device. If necessary, you can use a UL-certified USB wall charger. Don't use a USB hub

or battery pack to charge, and only use the charging cable that came with your tracker.



Alta



Blaze



Charge



Charge HR



Flex



One



Surge

Your Fitbit Alta™ comes equipped with a rechargeable lithium-polymer battery. If your battery

is low, charging fully may take one to two hours. Watch our video or read the instructions below

for more detail.

To charge your Alta:

1. Plug the charging cable into the USB port on your computer.

2. Plug the other end of the cable into the port on the back of the Alta.

3. By lining up the pins on the charging cable with the port on your Alta, attach the cable to

the tracker. These must be securely locked in place.

Table of Contents

Do you have a question about the Alta and is the answer not in the manual?

Page 1 2. Plug the other end of the cable into the port on the back of the Alta. 3. By lining up the pins on the charging cable with the port on your Alta, attach the cable to the tracker. These must be securely locked in place.
Page 2 4. To verify that charging has started, make sure you see a battery icon on Alta's display. When you disconnect your charging cable from your tracker, you'll see a message letting you know the tracker is no longer plugged in.