Huawei UPS5000-E Series Quick Manual page 4

3
(Optional) Installing the Tail Frame
1. Secure the tail frame fittings to the tail frame.
3. Remove the rear door of the cabinet, hinges,
connecting plates, and ground cable.
5. Install the hinges, connecting plates, and rear door on the tail frame.
6. Connect the ground cable to the rear door of the cabinet.
4
(Optional) Combining Cabinets
NOTE
The figures are for reference only. The actual product appearance prevails.
2. Secure the tail frame upper sealing plate to
the tail frame.
There are two upper sealing plates, and the
one used in this step has a gap.
4. Adjust the tail frame anchor bolts until the tail
frame is as high as the cabinet. Then secure
the tail frame to the UPS.
4