Racal Instruments 7064 Instruction Manual page 38

unsigned int vxi_3e;
unsigned int start_user;
unsigned int term_vector;
char terminators[4];
void(* routine[64])();
unsigned long nv_flags;
Notes:
1. The unsigned integers, vxi_id thru vxi_3e are described in the VXlbus
Specifications (Appendix I of Revision 1.3).
2. The vectors 2 thru 47 are described in table 6.2 of the 68000 handbook.
3. Bit 00 - ROM_VECTOR, is used for going to initialization routines in
ROM, at power-on.
4. Bit 01 - ROM_INIT, is used for setting up vectors and user parsers.
Whatever is at location H10000 during power-on is used if this flag is set.
/* Start in user parser? */
/* EOI non-usage flag & terminator count */
/* Vectors * /
/* 0 - user power on */
/* 1 - user parser */
/* 2 thru 47 correspond to 68000 */ (See note 2)
/* 48 - user software trigger */
/* 49 - reserved */
/* 50 - user parse error handler */
/* 51 - user clear handler */
/* 52 - user clock rollover handler */
/* 53 - user signal handler */
/* 54 to 63 reserved */
/* Misc. flags * /
/* Bit 00 - ROM_VECTOR */ (see note 3)
/* Bit 01 - ROM_INIT */ (see note 4)
/* Bit 02 - Unused */
/* Bit 03 - Unused */
/* Bit 04 - Unused */
/* Bit 05 - Unused * /
/* Bit 06 - Unused */
/* Bit 07 - Unused * /
/* Bit 08 - Unused */
/* Bit 09 - Unused */
/* Bit 10 - Unused */
/* Bit 11 - Unused */
/* Bit 12 - Unused * /
/* Bit 13 - Unused */
/* Bit 14 - Unused * /
/* Bit 15 - Unused * /
/* Bit 16 - Unused * /
/* Bit 17 - 31 - Unused
4-9