Selecting A Load Size; Selecting Wash-Rinse Temperatures - Whirlpool LLC7244AN0 Use And Care Manual

Selecting a load size
Position the Load Size Selector at the setting
that corresponds to the size load you want to
wash. Select a load size based upon the size
of the load and the fabric you are washing.
See page 14 for additional loading information.
To change the load size setting after the
washer has started to fill, move the Selector to
the desired new setting.
Your washer has a knob or slide Load Size
Selector
l
If your washer has a knob Load Size Selec-
tor, turn selector to the desired load size.
l
If your machine has a slide Load Size Selec-
tor, you may set the load size anywhere on or
between the ex small and ex large settings.
NOTE: If your washer has RESET on the Load
Size Selector, change the load size selection by
first moving the Selector to RESET, then to the
new load size.
Load size tips
l
Items should move freely in the washer. Do
not overload the machine or select a load size
that is too small for the wash load.
l
Use a large load size setting for best results
with permanent press clothes.
l
Reduce wash time when using a small load
size setting. Loads with only a few small items
need less wash time.
Selecting wash-rinse temperatures
Match the water temperature to the type of
fabric and soils being washed. The top tempera-
ture is the wash water and the bottom tempera-
ture is the rinse water. Your washer has a knob,
CLEAN TOUCH'" or push button Water Tem-
perature Selector.
Water temperature tips
l
Use warm wash water with the Permanent
Press and Delicate cycles. For heavily soiled
permanent press items, use hot wash water.
. Always use cold rinse water for permanent
press fabrics.
l
For heavily soiled permanent press or knit
clothes, pre-wash or presoak in warm water
before washing.
See the "Water usage guide" on page 1 I3 for
more information.
6
Knob selector
Push button selector
CLEAN TOUCH selector-
an indicator appears
above the water
temperatures selected