Whirlpool LLC7244AN0 Use And Care Manual page 11

What happens in each cycle
When the cycle Control Knob is set to a
number and pulled out, the washer fills before
agitation and timing start. The washer will
begin agitating immediately after filling; agita-
tion can occur with the washer lid up or down.
After agitation starts, the knob turns clockwise
until it points to OFF and the cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
NOTE: If you have selected high speed
agitation, the Gentle Wash system helps
protect your fabrics by reducing wash agitation
speed during the last few minutes of wash
agitation in the Regular and Permanent Press
cycles.
Regular and Delicate cycles
Fill to selected load size
Wash selected time
Drain-No agitation
Spin
M
4
Fill
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
Permanent Press cycle
Fill to selected load size
v
Wash selected time
v
Partial drain-No agitation
v
Fill to selected load size
Brief agitation
I4
-e-
Drain-No agitation
Spin
Fill
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
Off
11