Table of Contents
Advertisement
Thermostat Style Temperature Interlock Configuration
NOTE
This section only applicable if the KFCC is configured
with thermostat style temperature interlock .
Calibration
Thermostat is preset by factory to
95°F (35°C) and has a slow make
and break contact . It will make
contact on a temperature rise and
break contact on temperature
fall . The temperature set point
may have to be adjusted slightly
depending of both ambient
and cooking conditions . The
adjustment knob is located on
the back of the thermostat . Use a
small blade screwdriver to make
the adjustments .
1 . Turn counterclockwise to increase the temperature
set point, turn clockwise to decrease the temperature
set point .
2 . Quarter revolution in either direction corresponds to
a 22 .5°F (12 .5°C) adjustment . Be sure to make small
adjustments, about 1/16 of a turn (≈6°F) or less at one
time .
3 . Do not exceed more than one-half revolution in either
direction .
4 . Check system operation before making additional
adjustments .
®
Adjustment
Screw
Kitchen Fan Control Center
15
Advertisement
Table of Contents
