Microtech 4 Field Installed Sensors; Space Temperature Sensors; Ddc Space Sensors - Daikin Rebel Applied DPSA Installation And Start-Up Manual

MicroTech 4 Field Installed Sensors

The MicroTech 4 unit controller can be connected to a variety
of field installed sensors.
• Space Sensor with tenant override – Daikin PN:
113117701
• DDC Space Sensor with Setpoint Adjust and Tenant
Override – Daikin PN: 910143408
• Combo DDC Temp and Humidity Sensor with Setpoint Adj
and Tnt Ovrd – Daikin PN: 910191961
• Comminicating Network Space Sensors – Daikin PN:
910279216 and 910278050
• Space Humidity Sensor – Daikin PN: 910202119
• Wall Mounted CO Sensor – Daikin PN: 107287012
2
• Duct Mounted CO Sensor – Daikin PN: 910111672
2

Space Temperature Sensors

The Rebel Applied MicroTech 4 works with 10kohm Type 2
thermisotors and can support up to 3 sensors. These sensors
can drive cooling and heating based on the highest, lowest, or
average space sensor reading.
IM 1287 • REBEL APPLIED ROOFTOP

DDC Space Sensors

The Rebel Applied MicroTech 4 works with 10kohm Type 2
thermisotors and can support up to 3 sensors. These sensors
can drive cooling and heating based on the highest, lowest,
or average space sensor reading. A Combo sensor version
provides Temperature and humidity.
NOTE: Only one sensor can drive the Setpoint adjustment.
Figure 57: Daikin Space Sensor
52
Unit Operation
www.DaikinApplied.com