RF calibration (1/2)
★
For GRAND2(SM-G7102), new IF cable should be used for IMEI writing and Calibration.
(Detailed information : Refer SVC Bulletin (12-37) New IF Cable Guide.)
1. Run Baroserver program.
- Extract "BaroServer_Ver_1.0.6.zip" and Run "setup.exe"
- Click Next to install the program. Run BaroServer Launcher at the desktop.
- Enter 'Assistant Server IP', same as 'Host Server IP'.
- Check SVC Only (5555) option and input password.
- Click 'START' button and check if "Running" message appears.
SWA-CS Content Innovation
Service Excellence Beyond Imagination