Ecler EVO5 Quick Manual page 9

16. Run the installation programme
The mixer is supplied with an installation CD-ROM and a FireWire cable. Before connecting the mixer to the
computer, run the "setup_evo5" file, which you will find on the CD-ROM. This will automatically install the mixer
drivers and the "EVO5 Firmware Upgrade" and "EVO5 Librarian" applications. Once the installation is completed,
connect the mixer to the computer in accordance with the following instructions. The EVO5 is compatible with
Windows® XP SP2, Vista and Macintosh® OSX v 10.X. operating systems.
Windows XP SP2
Once you connected the mixer to the computer, the message "New hardware found. Ecler EVO5" will pop up.
The new hardware found wizard will open. Select the option "No, not this time" and press "Next".
Select the "Install software automatically" option (recommended).
9