Packaging Contents; Waste Disposal; Directives - Bonsaii S-series User Manual

The collection unit must be regularly checked and emptied if possible to ensure it is able to operate
smoothly.
Do not allow any items of clothing, plastic, or metal fragments to fall into the cutter.
It is advised to use a number of sheets of paper below the technical capacity in order to achieve a long life
expectancy.
Please regularly check the collection container and empty it if necessary to ensure smooth operation.
Wear or damage to the shredder can decrease the reliability of the data destruction, so please check from
time to time, the size of the material particles.
For a permanently quiet and smooth operation, we recommend the use of a Bonsaii care kit
approximately after every 500 sheets.
Run the (Cleaning Kit) through the shredder. The shredder will as such be uniformly cleaned and oiled.
The care kit is available from specialist retailers or by contacting the Bonsaii service hotline.
You must disconnect the plug first when cleaning the equipment. It must then be cleaned on the outside
by using a cloth and mild soap solution. The cloth should only be damp and not wet. Avoid any liquids from
penetrating into the cutter. Do not use bleach, alcohol, paint stripper, or any other flammable liquids
under any circumstances.

Packaging contents

Item
Quantity
Guideline 2012/19/EU concerning the handling, collection, recycling and disposal of electrical and
electronic equipment and their components ('waste electrical and electronic equipment', known as
WEEE).
The crossed symbol on a rubbish container indicates that the machine or device is not allowed to be disposed of
but it must be handed over to a suitably equipped collection centre for proper recycling or disposal.
We declare that this device has been manufactured in accordance with the applicable rules and
regulations.
Paper shredder
1
Power cable
1
18
User manual
1