Christie Q Series Network Quick Setup Manual page 6

1.5 Network Bridge Function
This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
By using the NETWORK BRIDGE function, a computer connected to the projector
using wireless or wired LAN can control an external device using
RS-232C communication using the projector as a network terminal.
Computer
Wireless
LAN
1.6 Other Functions
1.6.1 Email Alerts
The projector can automatically send an alert message to the specified using
addresses when the projector detects a certain condition requiring maintenance
or detected an error.
1.6.2 Projector Management using SNMP
The SNMP (Simple Network Management Protocol) manages the projector
information, which is a failure or warning status, from the computer on the
network. The SNMP management software is required on the computer to use
this function.
DWU1052/DHD1052
Network Quick Setup Guide
TCP/IP data Protocol change
Wired LAN
LAN cable
CONTROL port
LAN port
Serial data
RS-232C
RS-232C cable
WIRELESS port
(USB wireless adapter)
5
External device
020-000861-01 Rev. 1 (12-2015)
LIT GUID SET DWU/DHD1052 NET