Christie Q Series Network Quick Setup Manual page 10

3.3 Connection using Wireless LAN
Connection using wireless LAN is available with option parts, USB wireless
adapter (USB-WL-11N-NS).
Wireless LAN has two types of connection, Simple Access Point and
Infrastructure.
Fig. 3.3.a Without an access point communication (Simple Access Point))
Fig. 3.3.b With an access point communication (Infrastructure)
* Simple Access Point is a mode which connects to computers directly. The
projector can assign IP Address up to 11 devices.
* Infrastructure is one of the wireless LAN communication methods with having
an access point to communicate. If communicating with existing network, consult
with your network administrator.
NOTE
・Network settings can also be changed in Network Settings of Projector Web Control.
• Wireless LAN initial settings for the projector are as follows.
Mode : Simple Access Point
DHCP: Off
IP address : 192.168.10.1
Subnet Mask : 255.255.255.0
Default Gateway: 0.0.0.0
DNS Server: 0.0.0.0
SSID : SimpleAccessPoint*
SSID Broadcast: ON
Encryption: Off
Channel : 11
*Change default setting before use not to overlap.
• The same network address cannot be used for both wireless LAN and wired LAN.
・Communication speed of the projector may be deteriorated in Simple Access
Point mode depending on the number of connected devices.
・Network communication cannot be available between the devices connected to
the projector in Simple Access Point mode.
DWU1052/DHD1052
Network Quick Setup Guide
9
020-000861-01 Rev. 1 (12-2015)
LIT GUID SET DWU/DHD1052 NET