Advertisement
6
This projector has 6 Light-Block Sheets. Use 2 Light-Block Sheets corresponding with lens. (Refer to the
list below.) Use 1 Light-block Sheet for MODEL 38-809043-02
Set 2 Light-Block Sheets through the lens.
Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8.
NOTE:
Be sure to set each Light-Block Sheet as shown in Fig-8.
Make sure the mark (TOP and BACK) on Light-Block Sheets are correct and set them properly.
Light-Block Sheets For each lens.
Lens Model No.
38-809039-02
38-809037-02, 38-809038-02
38-809040-02, 38-809042-02
38-809036-02, 38-809041-02
38-809044-02
38-809043-02
LIGHT BLOCK SHEETS
Make sure the sheet figures are
correct and put in proper position.
Type No. (Part No.)
TYPE FA1 (610 285 8228)
TYPE FA2 (610 285 8204)
TYPE FB1 (610 285 8211)
TYPE FB2 (610 285 8198)
TYPE FC1 (610 284 2500)
TYPE FC2 (610 284 2494)
TYPE FB1 (610 285 8211)
MODEL 38-809043-02
LIGHT BLOCK SHEET
Make sure the sheet figure is
correct and put in proper position.
- 4 -
Fig-8
Advertisement
