1
Main machine
2
Power cord
3
Screw
2. Installation Instructions
2.1 Interface Introduction
The external interfaces of this product are all on the bottom of the host, as shown in the Figure 2.1.
RJ45, debugging interface
1
Power socket
2
USB, debugging interface
3
2.2 Installation Instruction
1)
Set up the device
Install the positioning screws. As shown in the Figure 2.2, install 4 positioning screws on the bottom of the host to fix the host.
Figure 2.1 Interfaces
4
Tel: 886.909 602 109 Email: sales@salukitec.com
1
Generate defense signals
1
Powering the device
4
For product installation and fixing
www.salukitec.com