Dis-/Assembling Agitator; Disassembling And Assembling Gear Box And Compressed-Air Motor - Krautzberger RL 72 Operating Instructions Manual

7.3

Dis-/assembling agitator

Uninstall agitator
Fig. 8: Disassemble agitator
1. Unscrew threaded pin ( Fig. 8/3).
2. Remove agitator ( Fig. 8/2) from the shaft ( Fig. 8/1).
Installing agitator
1. Slide agitator ( Fig. 8/2) onto the shaft ( Fig. 8/1).
2. Tightly screw in agitator ( Fig. 8/2) with the threaded pin ( Fig. 8/3).
7.4

Disassembling and assembling gear box and compressed-air motor

In the following, the complete disassembly and the complete assembly of the gear box is
described in general terms. This allows the replacement of any defective part.
Only use the manufacturer's OEM parts.
GB–22
Operating instructions
T-Dok-031-GB-Rev.4
mail@krautzberger.com, www.krautzberger.com