Related Manuals for Krautzberger 200-0157
Summary of Contents for Krautzberger 200-0157
- Page 1 Operating instructions Pressure container, 50 litre capacity, for operating pressures of 2.5 and 6 bar Doc-315 Rev. 0...
-
Page 2: Table Of Contents
Pressure containers may be fitted with stir- BASIC DESIGN........4 rers, level gauges, filling devices and other accessories. INSTALLATION, MOUNTING OF THE CONTAINER ..........5 Krautzberger 50-litre and 100-litre pressure Connections...........5 containers are designed for 10,000 stress Filling............5 reversals (1 stress reversal (or load cycle) REGULAR CHECKS, MAINTENANCE is equivalent to a pressure fluctuation range >... -
Page 3: Inspection By Qualified Experts In Accordance With The "Ad" Info Sheets
Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 Before opening a pressure con- Rooms in which hazardous substances tainer, the compressed air feed are stored or processed must have must always be shut off and the adequate ventilation. It may be neces- container rendered pressureless sary to install a ventilation system. -
Page 4: Basic Design
Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 3 Basic design Stirrer (optional) “Maximum” level gauge (optional) “Minimum” level gauge (optional) Material extraction point Pressure gauge Compressed air connection Level indicator (optional) Ball cock for venting Material return (optional) Sound dampener or connection option... -
Page 5: Installation, Mounting Of The Container
Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 4 Installation, mounting of the container Pressure containers must be installed in such a way that: neither employees nor third parties are at risk they are accessible for regular inspection the rating plate is easily visible... -
Page 6: Regular Checks, Maintenance
Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 Clean pressure container using a suitable detergent when necessary Fill pressure container. Do not exceed the maximum filling level (see Technical data)! Close cover, tighten star-grip screws/clamp fasteners Open compressed air feed 5 Regular checks, maintenance... -
Page 7: Wearing Parts, Spare Parts
Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 7 Wearing parts, spare parts Gaskets are subject to material fatigue and natural wear. Defective gaskets are noticeable from the leakage of air or coating substance on fittings or connections. Gaskets may be made of NBR, PE, EPDM or Viton. - Page 8 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 10 Dimensions Je nach Rührwerk ~Ø ~Ø...
- Page 9 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 EG-Konformitätserklärung EC-Declaration of conformity gemäß Anhang VII der EG – Druckgeräterichtlinie 97/23/EG as defined by Pressure Equipment Directive 97/23/EC Annex VII Krautzberger GmbH Stockbornstraße 13 65343 Eltville am Rhein HIERMIT ERKLÄREN WIR, DASS FOLGENDES PRODUKT HEREWITH WE DECLARE, THAT THE PRESSURE EQUIPMENT Materialdruckbehälter MDH mit 50l Inhalt;...
- Page 10 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 11 Inspection by qualified experts Pressure containers must be checked on a regular basis by qualified experts. The in- spection intervals depend on operational experience, the substances used, and the outcome of previous inspections.
- Page 11 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 Installation test first periodic inspection next periodic inspection...
- Page 12 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 next periodic inspection next periodic inspection...
- Page 13 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 next periodic inspection next periodic inspection...
- Page 14 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 next periodic inspection next periodic inspection...
- Page 15 Designation Dokumentation Type DOK-315-GB.doc Order-No. 200-0157 next periodic inspection next periodic inspection...
Need help?
Do you have a question about the 200-0157 and is the answer not in the manual?
Questions and answers