Installation - Kogan KAMERCVTBKA User Manual

INSTALLATION

Step 1: Install the front wheel
Wheel
Locknut
Bushing
Cap
Washer
Step 2: Install the rear wheel
Gear box
Locknut
Washer
Cap
Rear wheel
Set the washer and bushing
onto the front axle, then the
front wheel and second washer,
and tighten the lock nut into
place with a wrench. Cover the
locknut with the wheel cap.
Turn the car body over, remove
the manual damping spring
and bushing inside, and then
put a spring into the suspension
hole and set it into the sleeve.
Thread the 10mm rear axle
through the sleeve and body,
fixing the spring inside the car.
Ensure the electrical
connectors on the gearbox are
connected to those on the car
itself, then place the wheel on
the axle, then the large washer,
and fix it in place with the
locknut and cover with the
wheel cap.