Installation - Kogan KAMERSUVBKA User Manual

INSTALLATION

Step 1: Install the front wheel
Wheel
Locknut
Bushing
Cap
Washer
Step 2: Install the rear wheel
Gear box
Locknut
Washer
Cap
Rear wheel
Set the washer and bushing onto
the front axle, then the front
wheel and second washer, and
tighten the lock nut into place
with a wrench. Cover the locknut
with the wheel cap.
Turn the car body over, remove
the manual damping spring and
bushing inside, and then put a
spring into the suspension hole
and set it into the sleeve. Thread
the 10mm rear axle through the
sleeve and body, fixing the spring
inside the car.
Ensure the electrical connectors
on the gearbox are connected to
those on the car itself, then place
the wheel on the axle, then the
large washer, and fix it in place
with the locknut and cover with
the wheel cap.