Table of Contents
Advertisement
REMOTE CONTROL
When using the unit for the first time, you must pair the remote with the car.
1.
Turn off the car's power switch.
2.
Remove the battery cover on the remote control and insert 2 AAA batteries.
Once this has been done, the remote control's LED indicators will flash slowly.
3.
Turn on the car's power switch and the LEDs will turn solid when pairing is
successful.
Once pairing has completed, there is no need to repair until the remote control
batteries are next replaced.
4.
If the remove and car do not pair (the LEDs will continue flashing), remove the
battery and repeat steps 1-3.
5.
The indicator LED will turn off 10 seconds after the last input to save power. It will
wake when any button is pressed.
Forward
Brake
Accelerate
Back
Right
Left
Advertisement
Table of Contents
