Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KARDRVCRPKA
Summary of Contents for Kogan KARDRVCRPKA
- Page 1 KIDS RANGE ROVER- INSPIRED RIDE-ON CAR KARDRVCRPKA, KARDRVCRWHA & KARDRVCRBKA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Ensure you have read and fully understood all these instructions. • The product should be assembled correctly by an adult before use. • Do not drive in the street, traffic or other dangerous places. Ensure the car is driven under constant adult supervision. - Page 4 • If there is a non-rechargeable battery in the remote control, do not attempt to charge it. If it is a rechargeable battery, the charging should be done by the adult. Do not use different types of batteries in the remote control. Do not mix old and new batteries.
- Page 5 ASSEMBLY 1. Front Wheel Set the gasket into the front axle and then put the wheel on it. Next, insert the gasket on the wheel and lock them with the locknut. Finally, affix the wheel cover. 2. Rear Wheel Place the gear on the rear wheel and attach it with 4pc ST4 0x16 screws. Next, turn the car over, insert the wheel into the rear axle then put the gasket on it and attach them with the screws.
- Page 6 3. Windows Determine which are the left and right windows, align them carefully and with the door slots and insert. Use the 3 ST40*16 screws to attach. 4. Steering Wheel Connect the connector on the steering wheel to the steering shaft in the middle of the dashboard and attach the steering wheel with a bolt.
- Page 7 5. Car Chair Connect the batteries before installing the car chair. The hook of the seat should be aligned in the slot, then tighten the fixing holes on both sides and the front of the seat with screws turning clockwise. Insert the charger into the charging hole for charging. Do not operate the car while charging.
- Page 8 7. Windshield Remove the windshield carefully from the box, then insert the windshield into the slot: it will click into place. 9. Battery Connect the red wire to the storage battery positive terminal as indicated below:...
- Page 9 Function details Turn on the ignition: the car will start with lights on and the car display will show the voltage. Switch the Forward/Backward button to the forward position, then step on the footswitch, the car goes forward. Switch the Forward/Backward button to the backward position and then step on the footswitch, the car moves backwards.
-
Page 10: Remote Control
REMOTE CONTROL When using the unit for the first time, you must pair the remote with the car. Turn off the car’s power switch. Remove the battery cover on the remote control and insert 2 AAA batteries. Once this has been done, the remote control’s LED indicators will flash slowly. Turn on the car’s power switch and the LEDs will turn solid when pairing is successful. -
Page 11: Specifications
SPECIFICATIONS Battery 2x6V 4.5Ah Motor 12V 30W, 12V 15W Input: AC220V-240V, 50Hz-60Hz Charger Output: DC 12V, 1A Maximum load 30kg Working hour Recharge hour 8-12 hour, Working hour: 1-2 hour Speed 3-5km/hr Expected product life 37–96 months R/C Battery AAA 1.5Vx2 R/C Distance 15±5m IN THE BOX... -
Page 12: Troubleshooting
TROUBLESHOOTING Before attempting to use the car, make sure the battery is connected under the seat as per the instructions in assembly. Issue Possible Cause Solutions Low battery voltage Charge the battery Battery damage Replace battery Cable connectors are off Reconnect the connectors Motor damage Replace new motor or repair it... - Page 13 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...