Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KARDRVCRPKA
Summary of Contents for Kogan KARDRVCRPKA
- Page 1 KIDS RANGE ROVER- INSPIRED RIDE-ON CAR KARDRVCRPKA, KARDRVCRWHA & KARDRVCRBKA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS • The product should be assembled correctly by an adult before use. • The car contains small components, which is not suitable for children less than 3 years old. • Please charge up the battery before using the car. The charging should be performed by an adult. - Page 4 • If there is a non-rechargeable battery in the remote control, do not attempt to charge it. If it is a rechargeable battery, the charging should be done by the adult. Please do not use different types of batteries in the remote control. Please do not use old and new batteries at the same time.
- Page 5 ASSEMBLY 1. Front Wheel Set the gasket into the front axle and then put the wheel on it. Next, insert the gasket on the wheel and lock them with the locknut. Finally, affix the wheel cover. 2. Rear Wheel Place the gear on the rear wheel and attach it with 4pc ST4 0x16 screws. Next, turn the car over, insert the wheel into the rear axle then put the gasket on it and attach them with the screws.
- Page 6 3. Wind Shield Take out the windshield carefully from the box, then insert the windshield into the slot. It is assembled correctly when you hear a click. 4. Steering Wheel Connect the connector on the steering wheel with the one on the car, then insert the steering wheel into the pillar on the dashboard.
- Page 7 5. Car Chair Connect the positive pole of the power supply before installing the car chair. The hook of the seat should be aligned in the slot, then tighten the fixing holes on both sides and the front of the seat with screws turning clockwise. Insert the charger into the charging hole for charging.
- Page 8 7. Windshield Remove the windshield carefully from the box, then insert the windshield into the slot: it will click into place. 9. Battery Connect the red wire to the storage battery as indicated below:...
- Page 9 10. Wheels i. Place the gasket on the wheel axle. ii. Place the wheel and then the nut on the axle. iii. Place the cap on the wheel.
- Page 10 Function details Turn on the ignition, the car starts with lights on. The display on the car will show the voltage of the car when the car starts. Switch the Forward/Backward button to the forward position, then step on the footswitch, the car goes forward.
-
Page 11: Remote Control
REMOTE CONTROL When using the unit for the first time, you must pair the frequency of the remote with the car. Take out the remote control and install the battery. Press and hold the frequency button for 2-4 seconds: the LEDs will flash slowly. Turn on the power of the car and the LEDs will turn solid when pairing is successful. -
Page 12: Specifications
SPECIFICATIONS Battery 2x6V 4.5Ah Motor 12V 30W,12V 15W Input: AC220V-240V, 50Hz-60Hz Charger Output: DC 12V, 1A Maximum load 30kg Working hour Recharge hour 8-12 hour, Working hour: 1-2 hour Speed 3-5km/hr 37 months-96 months R/C Battery AAA 1.5Vx2 R/C Distance 15±5m IN THE BOX Electric car... -
Page 13: Troubleshooting
TROUBLESHOOTING Before attempting to use the car, make sure the battery is connected under the seat as per the instructions in assembly. Malfunction Analysis Solutions Low battery voltage Charge the battery Battery damage Replace new battery Cable connectors are off Reconnect the connectors Motor damage Replace new motor or repair it... - Page 14 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...