REMOTE CONTROL
When using the unit for the first time, you must pair the frequency of the remote with the
car.
1.
Take out the remote control and install the battery.
2.
Press and hold the frequency button for 2-4 seconds: the LEDs will flash slowly.
3.
Turn on the power of the car and the LEDs will turn solid when pairing is
successful.
4.
If the remove and car do not pair, (the LEDs will continue flashing), remove the
battery and repeat steps 1-3.
5.
The indicator LED will turn off 10 seconds after the last input to save power.
Forward
Brake
Accelerate
Back
Right
Left