Product Overview; Controls - Toro 30672 Operator's Manual

Product Overview

1. Side discharge
2. Mower deck
3. Spark plug
4. Fuel tank
Figure 3
5. T-bar control
6. Handle
7. Recoil-start handle
8. Front caster wheel

Controls

Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
g306582
1. Throttle control
2. Blade-control bail
3. Blade-control lever (power
takeoff)
4. Gear-shift lever
5. Upper control bar
6. Lower control bar
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Gear-Shift Lever
The gear-shift levels allows you to shift to 5 F
positions, N
EUTRAL
(Figure 4).
Note:
It has an in-line shift pattern.
Important:
Do not shift while the machine is
moving, as you may damage the transmission.
9
Figure 4
7. Parking-brake lever
8. Choke
9. Key switch
10. Upper handle
11. Lower handle
LOW
4).
position, and R
EVERSE
g001446
to F
AST
ORWARD
position