Positioning The Flow Baffle - Toro 30672 Operator's Manual

Commercial walk-behind mower, fixed deck, t-bar, gear drive with 32in or 36in cutting unit
Hide thumbs Also See for 30672:
Table of Contents

Advertisement

1. Slot

Positioning the Flow Baffle

The following figures are only recommendations
for use. Adjustments vary by grass type, moisture
content, and the height of the grass.
Note:
If the engine power draws down and the
mower ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for
this position is as follows:
Short, light grass mowing conditions
Dry conditions
Smaller grass clippings
Propels grass clippings farther away from the
mower
Figure 12
Figure 11
2. Nut
Position B
Use this position when bagging.
g012676
Position C
This is the full open position. The suggested use for
this position is as follows:
Tall, dense grass mowing conditions
Wet conditions
Lowers the engine-power consumption
Allows increased ground speed in heavy conditions
g012677
18
Figure 13
Figure 14
g012678
g012679

Advertisement

Table of Contents
loading

This manual is also suitable for:

30674

Table of Contents