1. Manuals
  2. Brands
  3. EMBRON Manuals
  4. Desktop
  5. HATTELAND HT B30G STC M Series
  6. User manual

EMBRON HATTELAND HT B30G STC M Series User Manual

Fanless computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
Compact / Ultra Compact Fanless Computer
HT B30Gx STC-yzz-Mzzzzz (Long Depth Model)
HT B30Gx STC-yzz-Mzzzzz (Long Depth Model) - HW00
HT B30Kx STC-yzz-Ezzzzz (Short Depth Model)
where "x" is CPU type, "y" = Operating System (OS) type,
"z" = hardware configuration dependent
Updated: 02 Oct 2020
Created: 363
Please visit www.hattelandtechnology.com for the latest electronic version of this manual.
User Manual HT B30
Doc Id: INB100610-3 (Rev 02)
Approved: 6987

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HATTELAND HT B30G STC M Series and is the answer not in the manual?

Questions and answers

Related Manuals for EMBRON HATTELAND HT B30G STC M Series

Summary of Contents for EMBRON HATTELAND HT B30G STC M Series

  • Page 1 USER MANUAL Compact / Ultra Compact Fanless Computer HT B30Gx STC-yzz-Mzzzzz (Long Depth Model) HT B30Gx STC-yzz-Mzzzzz (Long Depth Model) - HW00 HT B30Kx STC-yzz-Ezzzzz (Short Depth Model) where “x” is CPU type, “y” = Operating System (OS) type, “z” = hardware configuration dependent User Manual HT B30 Updated: 02 Oct 2020 Doc Id: INB100610-3 (Rev 02)
  • Page 2 Copyright © 2020 Hatteland Technology AS Eikeskogvegen 52, N-5570 Aksdal, Norway. All rights are reserved by Hatteland Technology AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.

  • Page 3: Table Of Contents

    Contents Contents ..................3 Contents of package ...................7 General ..................9 About this manual ..................10 About Hatteland Technology ..............10 www.hattelandtechnology.com ..............10 Contact Information ...................10 HT B30 Computers introduction ..............11 Product Labelling ..................12 Installation ................13 Installation and mounting of computers .............14 Cables .......................15 Housing / Terminal Block Connector Overview .........16 Accessible Storage Device removal / replacement HT B30G ....18...
  • Page 4 Contents Specifications ................. 37 Specifications - HT B30Gx STC-xxx-Mxxxxx ..........38 Specifications - HT B30Gx STC-xxx-Mxxxxx (HW00) .......39 Specifications - HT B30Kx STC-xxx-Exxxxx ..........40 Specifications - CAN Module with CO-Processor ........41 ZIA0001310-B ......................41 Specifications - CAN Module with CO-Processor ........42 ZIA0001310-SLCAN ....................
  • Page 5 Contents Technical Drawings - Accessories ........57 Technical Drawings - Mounting Bracket Kit - HT B30G ......58 HT MBK STD-A1 ..................... 58 Technical Drawings - Mounting Bracket Kit - HT B30K ......59 HT MBK STD-A2 ..................... 59 Technical Drawings - Cable Retainer/Relief Kit .........60 HT RET STD-A1 ......................
  • Page 6 Contents Appendixes ................73 Pinout Assignments ...................74 SSD Selection Guide .................77 ATX / AT Power Modes ................80 BIOS - How to create RAID volume ............81 Trusted Platform Module (TPM) 2.0 ............85 TDP (Thermal Design Power) ..............86 Display Output Behavior ................87 DisplayPort (DP++) Output Note ...............88 Secure Boot ....................89 Battery Status and Alarm ................90...

  • Page 7: Contents Of Package

    Contents of package Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list. Item Description Illustration EUR TYPE F 1 x Power Cable (Black) European Type F “Schuko” to IEC. Length: 1.8m (5.9 ft) Applicable only for models with AC Power Input (HT B30Gx models) TP52/TC01-1,8M 1 x Power Cable (Black) US Type B plug to IEC.
  • Page 8 Contents of package Package may also include: (based on accessories/options ordered) Item Description Illustration Depending on factory mounted options, Terminal Bracket Connector kit as follows: 4 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 NMEA COM (PCA200828-1) 4 x 4-pin Terminal Block 3.81 for CAN Interface (ZIA0001310-B) 4 x 5-pin Terminal Block 3.81 for Digital Input/Output (PCA100297-1) Terminal Block Connectors Rack Mount Kit (2U Rack Mount) contains:...

  • Page 9: General

    General...

  • Page 10: About This Manual

    Hatteland Technology AS About this manual The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last updated and revision date of this manual are shown both on the frontpage and also in the “Revision History” chapter. This user manual is a standard/general manual that applies to all variations of its product family, i.e.

  • Page 11: Ht B30 Computers Introduction

    Computers HT B30 Computers introduction The HT B30 range is based on the latest Intel chipset and Skylake processor platform, delivering even more power for maritime technology developers to design and build high-end vessel control and monitoring solutions that enable safer and more effecient maritime operations.

  • Page 12: Product Labelling

    Product Labelling Serial Number Label Placement (external) Rear Side of unit HT B30G (Long Depth) Only present if the unit was delivered with factory installed Operating System (OS) such as Microsoft® Windows® Embedded Enterprise. The same Product Key is also printed on the “Product Declaration”...

  • Page 13: Installation

    Installation...

  • Page 14: Installation And Mounting Of Computers

    General Installation Recommendations Installation and mounting of computers Units may be intended for various methods of installation or mounting (rack mounting, panel mounting, bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must definitely be kept clear;...

  • Page 15: Cables

    General Installation Recommendations Cables Use only high quality shielded signal cables. For RGB/DVI/DP/HDMI cables use only cables with separate coax for Red, Green and Blue. Installation IND100210-12...

  • Page 16: Housing / Terminal Block Connector Overview

    General Installation Recommendations Housing / Terminal Block Connector Overview Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plug into the connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal block connectors have steering rails, which ensures that it can not be mounted wrong.
  • Page 17 General Installation Recommendations Configuring Housing / Terminal Block connectors Below is a brief illustration that might be useful during configuration and installation of such connectors. You will need suitable pre-configured cable(s) and tools to configure the connector(s) and cable(s) that are present in your installation environment.

  • Page 18: Accessible Storage Device Removal / Replacement Ht B30G

    General Installation Recommendations Accessible Storage Device removal / replacement HT B30G Note: Applies only for HT B30G (Long Depth Models). Areas of interest are marked in this section with symbols in color. Although the trays are Hot-Swappable, it is considered to be a good practice to power off the unit and disconnect power cable before proceeding! ▼...

  • Page 19: Mounting Bracket Kit (Wall / Desktop) Ht B30G (Long Depth Models)

    General Installation Recommendations Mounting Bracket Kit (Wall / Desktop) HT B30G (Long Depth Models) Mounting Bracket Kit (HT MBK STD-A1) is included with delivery. Note: Areas of interest are marked in this section with symbols in color. Note: In order to secure the unit properly, please use only the screws delivered with the unit. Choosing own screws and longer than factory specified may cause permanent damage inside the unit and Warranty will be void ! Item Amount...

  • Page 20: Mounting Bracket Kit (Wall / Desktop) Ht B30K (Short Depth Models)

    General Installation Recommendations Mounting Bracket Kit (Wall / Desktop) HT B30K (Short Depth Models) Mounting Bracket Kit (HT MBK STD-A2) is included with delivery. Note: Areas of interest are marked in this section with symbols in color. Note: In order to secure the unit properly, please use only the screws delivered with the unit. Choosing own screws and longer than factory specified may cause permanent damage inside the unit and Warranty will be void ! Item Amount...

  • Page 21: Mounting Guidelines And Tips

    General Installation Recommendations Mounting Guidelines and tips Even though the HT B30 is fanless with no cooling apertures in the chassis, the unit will produce a certain amount of heat through the aluminium chassis. The top of the chassis as been designed with heat dissipation groves which allow heat to be properly expelled.

  • Page 22: Physical Overview - Ht B30Xx Stc-Xxx-Xxxxxx

    Physical Overview - HT B30xx STC-xxx-xxxxxx Front area of HT B30G (Long Depth Model) Device #0 (Boot/Main) Device #1 (Optional) Power LED Power ON/OFF / Reset Combined Button 2.5” Removable Trays Connector area of HT B30G (Long Depth Model) 1 x DP++ Out 2 x RJ45 Network (Intel) 2 x RJ45 Network (Realtek) 1 x DVI-I + DVI-D...

  • Page 23: Front Area Of Ht B30G (Long Depth Model) - Hw00

    Physical Overview - HT B30xx STC-xxx-xxxxxx Front area of HT B30G (Long Depth Model) - HW00 Device #0 (Boot/Main) Device #1 (Optional) Power LED Power Button ON/OFF Activity LED 2.5” Removable Trays or Reset Function (optional model) Connector area of HT B30G (Long Depth Model) - HW00 1 x DP++ Out 2 x RJ45 Network (Intel) 2 x RJ45 Network (Realtek)

  • Page 24: Front Area Of Ht B30K (Short Depth Model)

    Physical Overview - HT B30xx STC-xxx-xxxxxx Front area of HT B30K (Short Depth Model) Grounding Screw Connector area of HT B30K (Short Depth Model) 1 x DP++ Out 2 x RJ45 Network (Intel) 2 x RJ45 Network (Realtek) 1 x DVI-I + DVI-D 1 x SDXC (SDcard) slot Grounding Screw for Power/Unit...

  • Page 25: Front User Controls & Unit Operation - Ht B30G (Long Depth Model)

    Physical Overview - HT B30xx STC-xxx-xxxxxx Front User Controls & Unit Operation - HT B30G (Long Depth Model) Power ON/OFF + RESET + Power LED (combined function): To turn ON the computer, press down button and release it immediately. The Power LED indication will illuminate green and the operating system will automatically boot.

  • Page 26: Front User Controls & Unit Operation - Ht B30G (Long Depth Model) - Hw00

    Physical Overview - HT B30xx STC-xxx-xxxxxx Front User Controls & Unit Operation - HT B30G (Long Depth Model) - HW00 as Power ON/OFF: To turn ON the computer, press down button and release it immediately. The Power LED indication will illuminate green and the operating system will automatically boot.

  • Page 27: Rear User Controls & Unit Operation - Ht B30K (Short Depth Model)

    Physical Overview - HT B30xx STC-xxx-xxxxxx Rear User Controls & Unit Operation - HT B30K (Short Depth Model) as Power ON/OFF: To turn ON the computer, press down button and release it immediately. The Power LED indication will illuminate green and the operating system will automatically boot. To turn OFF the computer, press down button and release it immediately, the operating system will perform the proper shutdown procedure and shut down the unit safely and turn off the unit.

  • Page 28: Connectors & Connectivity (All Models)

    Physical Overview - HT B30xx STC-xxx-xxxxxx Connectors & Connectivity (All models) 1 x DisplayPort (DP++) OUTPUT: Connect your DP (male) cable to the DisplayPort (v1.2) 20P connector (female) on the rear side of the unit. The DP has its own locking mechanism that locks the plug inserted. Make sure the plug “clicks” into place to verify a proper and secure connection.
  • Page 29 Physical Overview - HT B30xx STC-xxx-xxxxxx 2 x Network LAN1, LAN2 INPUT / OUTPUT: Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable connector ”clicks” into the RJ-45 connector. Network ports are Intel® Gigabit LAN, supports Teaming. 2 x Network LAN3, LAN4 INPUT / OUTPUT: Supports 10/100/1000Mbps Ethernet (LAN).
  • Page 30 Physical Overview - HT B30xx STC-xxx-xxxxxx GROUNDING SCREW - In front (HT B30K Model): Please review “Installation and mounting of computers” in the “Installation” chapter, pt. 6 for more information. GROUNDING SCREWS (In connector area, both models): Grounding screws are provided for optional factory modules, please review “Connector Area” on previous pages to determine their functions and locations.
  • Page 31 Physical Overview - HT B30xx STC-xxx-xxxxxx EXPANSION AREA for Optional modules: In the expansions area of the unit, optional factory mounted modules may be installed. Connect and secure your cables to the Terminal Blocks or connectors, depending on module installed. The table below lists all modules currently available for factory mounting.

  • Page 32: Module Expansion Matrix

    Physical Overview - HT B30xx STC-xxx-xxxxxx Module Expansion Matrix Table below indicates how many duplicates of the same module can be installed at the same time. Due to limited number of internal connectors, available space and technical limitations, some combinations (with duplicates) are naturally not possible to achieve.
  • Page 33 Physical Overview - HT B30xx STC-xxx-xxxxxx Table below indicates how many combinations of modules is possible to install (each table row totals upto max 3) for the Long Depth Models. Further, as per. factory standards, the unique location and shifting of modules are illustrated in the last column, where the number inside the table indicate unique id, starting from 1 to max 3 modules.
  • Page 34 Physical Overview - HT B30xx STC-xxx-xxxxxx Table below indicates how many combinations of modules is possible to install (each table row totals upto max 3) for the Short Depth Models. Further, as per. factory standards, the unique location and shifting of modules are illustrated in the last column, where the number inside the table indicate unique id, starting from 1 to max 3 modules.

  • Page 35: Com Ports Numbering

    Physical Overview - HT B30xx STC-xxx-xxxxxx COM Ports Numbering Default numbering on a factory standard model (example: Microsoft® Windows® 10) are as follow: COM 1-2 = System reserved COM 3-4 = CAN/SLCAN (if factory option ZIA0001310-B / ZIA0001310-SLCAN) COM 5-6 = 2 x Physical Port, RS-232 Isolated Module - (if factory option, 1st “PCA100309-1”) COM 7-8 = 2 x Physical Port, RS-232 Isolated Module - (if factory option, 2nd “PCA100309-1”)
  • Page 36 This page left intentionally blank...

  • Page 37: Specifications

    Specifications...

  • Page 38: Specifications - Ht B30Gx Stc-Xxx-Mxxxxx

    Specifications - HT B30Gx STC-xxx-Mxxxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. T E C H N I C A L D E S C R I P T I O N T E C H N I C A L D E S C R I P T I O N Computer Specifications: (Standard model) External Connector Type:...

  • Page 39: Specifications - Ht B30Gx Stc-Xxx-Mxxxxx (Hw00)

    Specifications - HT B30Gx STC-xxx-Mxxxxx (HW00) SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. T E C H N I C A L D E S C R I P T I O N T E C H N I C A L D E S C R I P T I O N Computer Specifications: (Standard model) External Connector Type:...

  • Page 40: Specifications - Ht B30Kx Stc-Xxx-Exxxxx

    Specifications - HT B30Kx STC-xxx-Exxxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. T E C H N I C A L D E S C R I P T I O N T E C H N I C A L D E S C R I P T I O N Computer Specifications: (Standard model) External Connector Type:...

  • Page 41: Specifications - Can Module With Co-Processor

    Specifications - CAN Module with CO-Processor All specifications are subject to change without prior notice! This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.

  • Page 42: Specifications - Can Module With Co-Processor

    Specifications - CAN Module with CO-Processor All specifications are subject to change without prior notice! This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.

  • Page 43: Specifications - Nmea / Iec Com Module Rs-422 / Rs-485

    Specifications - NMEA / IEC COM Module RS-422 / RS-485 This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.
  • Page 44 Specifications - NMEA / IEC COM Module RS-422 / RS-485 SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. CAUTION This unit contains electrostatic sensitive devices. Observe precautions for handling. Users who needs to open the unit set jumper settings will VOID THE WARRANTY! Before opening, proper ESD measurements must be taken! 1.
  • Page 45 Specifications - NMEA / IEC COM Module RS-422 / RS-485 SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. 5-pin Isolated NMEA COM COM Ports are identifed in the Operating System “RS-422/RS-485”...
  • Page 46 Specifications - NMEA / IEC COM Module RS-422 / RS-485 SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. NMEA Standards: IEC61162-1 chapter 3.5.5 state that the input shall withstand 15V between ground and input. The reference speed specified is set at 4800 bit/s.

  • Page 47: Specifications - Isolated Digital Input/Output Module

    Specifications - Isolated Digital Input/Output Module All specifications are subject to change without prior notice! This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.
  • Page 48 Pin 13 SELECT Signal from printer to indicate that the printer is selected. Pin 14 AUTO FEED This active low output causes the printer to add a line feed after each line Pin 15 ERR# Signal from printer indicating that an error has been detected. Pin 16 INIT# This active low output initialises (resets) the printer.

  • Page 49: Specifications - Lan Module

    Specifications - LAN Module All specifications are subject to change without prior notice! This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.

  • Page 50: Specifications - Isolated Com Module Rs-232

    Specifications - Isolated COM Module RS-232 All specifications are subject to change without prior notice! Pinout Assignments This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- Serial COM RS-232 non-isolated, 9-pin DSUB Female Serial COM RS-485/RS-422, 9-pin DSUB Male readable form without the prior written consent of Hatteland Technology...

  • Page 51: Specifications - External Modules (Usb)

    Specifications - External Modules (USB) Specifications - External Modules (USB) All specifications are subject to change without prior notice! This information may not, in whole or in part, be copied, photocopied, DATASHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Technology AS.
  • Page 52 Specifications - External Modules (USB) All specifications are subject to change without prior notice! SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hattelandtechnology.com for the latest electronic version. Ordering Details: TypeNumber Description Internal Specifications (link to separate datasheets) HT 00262 OPT-A1 NMEA COM (Based on PCA200828-1) www.hattelandtechnology.com/hubfs/pdf/ind_ds/ds_pca200828-1_com_module_rs-422_rs-485.pdf...

  • Page 53: Technical Drawings

    Technical Drawings...

  • Page 54: Technical Drawings - Ht B30Gx Stc-Xxx-Mxxxxx

    Technical Drawings - HT B30Gx STC-xxx-Mxxxxx IND100132-372...

  • Page 55: Technical Drawings - Ht B30Gx Stc-Xxx-Mxxxxx (Hw00)

    Technical Drawings - HT B30Gx STC-xxx-Mxxxxx (HW00) IND100132-470...

  • Page 56: Technical Drawings - Ht B30Kx Stc-Xxx-Exxxxx

    Technical Drawings - HT B30Kx STC-xxx-Exxxxx IND100132-373...

  • Page 57: Technical Drawings - Accessories

    Technical Drawings - Accessories...

  • Page 58: Technical Drawings - Mounting Bracket Kit - Ht B30G

    Technical Drawings - Mounting Bracket Kit - HT B30G HT MBK STD-A1 IND100132-374...

  • Page 59: Technical Drawings - Mounting Bracket Kit - Ht B30K

    Technical Drawings - Mounting Bracket Kit - HT B30K HT MBK STD-A2 IND100132-375...

  • Page 60: Technical Drawings - Cable Retainer/Relief Kit

    Technical Drawings - Cable Retainer/Relief Kit HT RET STD-A1 IND100132-378...

  • Page 61: Technical Drawings - 2U Rack Mount Kit

    Technical Drawings - 2U Rack Mount Kit HT RMK STD-A1 IND100132-379...

  • Page 62: Technical Drawings - 2U Rack Mount Kit W/Handles

    Technical Drawings - 2U Rack Mount Kit w/handles HT RMK STD-H1 IND100132-380...

  • Page 63: Technical Drawings - 19 Inch Rack Mount Kit

    Technical Drawings - 19 inch Rack Mount Kit HT SRK STD-A2 (with 1 x HT B30) IND100132-477...

  • Page 64: Ht Srk Std-A2 (With 2 X Ht B30)

    Technical Drawings - 19 inch Rack Mount Kit HT SRK STD-A2 (with 2 x HT B30) IND100132-477...

  • Page 65: Packaging Instructions Ht Srk Std-A2

    Technical Drawings - 19 inch Rack Mount Kit Packaging Instructions HT SRK STD-A2 IND100132-477...

  • Page 66: Technical Drawings - 19 Inch Rack Mount Kit

    Technical Drawings - 19 inch Rack Mount Kit HT SRK STD-A1 IND100132-381...

  • Page 67: Technical Drawings - Mounting Rails Kit 20 Inch

    Technical Drawings - Mounting Rails Kit 20 inch SF-41-20 IND100132-478...

  • Page 68: Technical Drawings - Mounting Rails Kit 26 Inch

    Technical Drawings - Mounting Rails Kit 26 inch SF-41-26 IND100132-479...

  • Page 69: Technical Drawings - Mounting Plate/Cable Tension Relievers

    Technical Drawings - Mounting Plate/Cable Tension Relievers for HT B30G (w/HT 00228 OPT-A1) IND100132-376...

  • Page 70: Technical Drawings - Mounting Plate/Cable Tension Relievers

    Technical Drawings - Mounting Plate/Cable Tension Relievers for HT B30K (w/HT 00228 OPT-A1) IND100132-377...

  • Page 71: Technical Drawings - External Modules (Usb)

    Technical Drawings - External Modules (USB) IND100132-245...
  • Page 72 This page left intentionally blank...

  • Page 73: Appendixes

    Appendixes...

  • Page 74: Pinout Assignments

    Pinout Assignments Connectors illustrated here are either standard by factory default or may be available (through factory customization). Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired connector.
  • Page 75 Pinout Assignments 20-pin DisplayPort (DP) Female 10+10 pin RS-422 / RS-485 NMEA Module Type Number “PCA200828-1 / PCA100293-1” 19 17 15 13 11 9 7 5 3 1 6 7 8 9 1 0 6 7 8 9 1 0 20 18 16 14 12 10 8 6 4 2 1 2 3 4 5 1 2 3 4 5...
  • Page 76 Pinout Assignments 10+10 pin Isolated Digital Input/Output Module 9-pin Amplifi ed Mono/Stereo Audio Out, DSUB Female Type Number “PCA100297-1” Type Number “HT 00271 OPT-A1” / “VSD203134-1” 4 3 2 1 Module A Module B 9 8 7 6 PIN 01 LAUDR Left Audio Return* PIN 02 LAUD Left Audio* PIN 03 RAUDR Right Audio Return...

  • Page 77: Ssd Selection Guide

    SSD Selection Guide Solid State Disk (SSD) Devices Last revised : 26 March 2018 SSD's has many benefits over conventional hard drives, but when it comes to write endurance it is important to choose the technology to be used with care. It is of very high importance to consider several aspects when using an SSD for a particular application, below the most critical ones, such as: - Nature of the application, data written to disk during a defined time period (worst case).
  • Page 78 SSD Selection Guide Calculation of required size of SSD (Multi-Level Cell - MLC) device) The table below details the write endurance of the an enterprise environment. All values are verified by Hatteland Technology during the qualification / selection process. Please review our relevant Product Datasheets for your unit to determine the actual installed device and its TBW values before proceeding with calculations below.
  • Page 79 SSD Selection Guide Measure of number of write cycles (Intel® Solid-State Drive Toolbox software) https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18455 Download Software from: Preparation 1: Install "Intel® Solid-Sate Drive Toolbox" at target system. 2: Install the unit in valid configuration, i.e. the application shall running valid use case, if possible use worst case scenario (with respect to disk activity).

  • Page 80: Atx / At Power Modes

    ATX / AT Power Modes Battery Connected. ATX mode: BIOS setting Battery Power Status Expected Results Always On Connected Always On Connected Last State Connected Last State Connected Always Off Connected Always Off Connected Battery Disconnected. ATX mode: BIOS setting Battery Power Status Expected...

  • Page 81: Bios - How To Create Raid Volume

    BIOS - How to create RAID volume BIOS - How to create RAID volume Instructions Before configuring it is assumed the user has the appropriate knowledge on how to enter and navigate within BIOS and change values. When BIOS screen has been accessed, follow the steps below. Enable RAID mode (for all models) 1.
  • Page 82 BIOS - How to create RAID volume Create RAID Volume for HT B30xH (i5-6300U) and HT B30xJ (i7-6600U) models 1. After RAID has been set and unit rebooted, press CTRL+i to enter RAID Setup where the following menu is displayed. Intel(R) Rapid Storage Technology - Option ROM - 12.5.0.1815 Copyright(C) 2003-13 Intel Corporation.
  • Page 83 BIOS - How to create RAID volume Then configure the RAID Volume as you want: Intel(R) Rapid Storage Technology - Option ROM - 12.5.0.1815 Copyright(C) 2003-13 Intel Corporation. All Rights Reserved. CREATE VOLUME MENU NAME: Volume1 RAID1(Mirror) RAID Level: Disks: Select Disks Strip Size: N/A Capacity: 74.5 Sync: N/A...
  • Page 84 BIOS - How to create RAID volume Procedure to reset disk mode in Microsoft® Windows® 7 before capturing image: - Open Registry Editor and go to: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\ For each of the subkeys: Msahci, iaStorV and iaStor; - Find “Start” string, doubleclick and change value from 3 to 0, if not set. - Exit and shutdown the unit.

  • Page 85: Trusted Platform Module (Tpm) 2.0

    Trusted Platform Module (TPM) 2.0 Trusted Platform Module (TPM) 2.0 Trusted Platform Module (TPM) 2.0 Support and requirements: - Only supported for OS installed as UEFI boot. Legacy boot is not supported. - Secure Boot must be configured and enabled for full TPM functionality to be available. - TPM 2.0 is not natively supported by Windows 7, but hotfix to add support for Bitlocker Drive Encryption with TPM 2.0 is available here: https://support.microsoft.com/en-us/help/2920188/update-to-add-support-for-tpm-2-0-in-windows-7-and-windows-server-2008...

  • Page 86: Tdp (Thermal Design Power)

    TDP (Thermal Design Power) TDP (Thermal Design Power) TDP limit defines the maximum power the CPU/GPU chip can use, measured in Watts. The available options for HT B30 are Nominal and TDP Down. - Nominal (15W for all CPU variants) is default setting with standard performance. - TDP Down (10W for Celeron, 7.5W for i5/i7) option can be set to lower allowed power usage.

  • Page 87: Display Output Behavior

    Display Output Behavior Display Output Behavior Display Output Behavior Default behavior and compatibility of display output varies slightly depending on boot type used. - Legacy boot uses Legacy VGA BIOS (also referred to as VBIOS). - UEFI boot use Graphics Output Protocol (GOP) driver. UEFI boot (GPT partitioning) is recommended for Windows®...

  • Page 88: Displayport (Dp++) Output Note

    DisplayPort (DP++) Output Note DisplayPort (DP++) Output Note DisplayPort (DP++) Output The DP output supports use of MST Hub, and Passive/Active Adapters. MST Hub can support up to 3 display output with total bandwidth up to 21.6Gbps. - Example of bandwidth usage for common resolutions: - 1920x1080 @60hz - 22% - 1920x1200 @60hz - 30% - 2560x1440 @60hz - 35%...

  • Page 89: Secure Boot

    Secure Boot Secure Boot Secure Boot Secure Boot is a security feature that can protect the system from running unauthorized boot loaders and avoid loading non-signed drivers during boot process. The feature is only supported for boot devices in UEFI mode. Basic Procedure: - Set UEFI boot type in BIOS - Enter BIOS by pressing Del key during boot.

  • Page 90: Battery Status And Alarm

    Battery Status and Alarm Battery Status and Alarm CMOS battery voltage is monitored during each boot and the following warning will show if it’s below set low limit: WARNING!!! The CMOS battery capacity too low. If this error is displayed, it is recommended to schedule service of the unit for replacement of CMOS battery. When the CMOS battery is dead, or voltage is too low, it will not keep track of time/date when power is disconnected.

  • Page 91: Wakeonlan (Wol) Function

    WakeOnLan (WOL) function DOC207811-1 HTB30MB Wake-on-LAN User Manual DOC207811-1 - Revision 01 INDEX INDEX ............................2 Revision History .......................... 3 Introduction ........................4 Equipment .......................... 4 Test Procedure ........................5 Enable the WoL function in BIOS (Required) ..............5 Enable the WoL function in OS (Required) ............... 6 Running the tests ......................

  • Page 92: Introduction

    WakeOnLan (WOL) function DOC207811-1 - Revision 01 1 Introduction This document is for users to setup and validate Wake-on-Lan functionality for their HTB30 computer. 2 Equipment For this test you will need: Two computers with OS installed where at least one computer is a HTB30 computer Two Network cables One Network Switch WoL Magic Packet sender...

  • Page 93: Test Procedure

    WakeOnLan (WOL) function DOC207811-1 - Revision 01 3 Test Procedure 3.1 Enable the WoL function in BIOS (Required) Enter the BIOS. Go to ACPI configuration under the Advanced tab, make sure Wake on LAN is set to “Enabled” and State After G3 is set to “S5 State”. Save and Exit. This will enable WoL on your HTB30 unit.

  • Page 94: Enable The Wol Function In Os (Required)

    WakeOnLan (WOL) function DOC207811-1 - Revision 01 3.2 Enable the WoL function in OS (Required) In Windows, open “Device Manager” and open the tab with your network adapters. Right click the network adapter you wish to use for WoL and select “Properties”. Then move to the “Power Management”...
  • Page 95 WakeOnLan (WOL) function DOC207811-1 - Revision 01 Realtek: Appendix IND100077-225 Hatteland Technology AS | www.hattelandtechnology.com | Enterprise no: NO974533146 Page 7 of 9...

  • Page 96: 3.3 Running The Tests

    WakeOnLan (WOL) function DOC207811-1 - Revision 01 3.3 Running the tests Open Network settings and locate the network adapter you will be using for WoL. Right click at select “Status”. Within status, select “Details”. And you will get the window below. In this window, “Physical Address” is your Mac address.

  • Page 97: Conclusion

    WakeOnLan (WOL) function DOC207811-1 - Revision 01 Open your WoL Magic package sender of your choice on a different computer on the same network or a direct LAN connection between the two units and enter the IP address, Mac address and set the subnet to 0.0.0.0(Local Network) of the unit you wish to power on.

  • Page 98: Bios Settings Overview

    BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries SMBIOS/DMI Info Fixed entries, same in all units System or BIOS specific entries DMI BIOS Revisions BIOS Information - Type 0 BIOS Vendor Insyde BIOS Version B18A.29A BIOS Release Date 10/29/2018 System Information - Type 1...
  • Page 99 BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries BIOS Version B18A.29A Serial Number: <Serial Number> Processor Type Intel® CORE™ i5-6300U CPU@2.40GHz CPU ID: 0x406E3 (SKYLAKE ULT ULX) CPU Speed 2500 MHZ CPU Stepping 03 (D0/K0 Stepping) L1 Data Cache: 32 KB L1 Instruction Cache:...
  • Page 100 BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries Video Configuration ----Primary Display <Auto><IGFX> Auto ----Internal Graphics <Auto><Disabled><Enabled> Auto ----Boot Display <Auto><DVI1+DP><DVI1+DVI2><DVI2+DP><DP+DVI2> Auto Audio Configuration ----HD Audio <Auto><Disabled><Enabled> Enabled SCS Configuration ----SDCard 3.0 Controller<Disabled><Enabled> Enabled ----SDCard 3.0 Controller Bus Speed Mode <Default/High speed mode> <Disable SDR50><Disable SDR104><Disable SDR50 and SDR104>...
  • Page 101 BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries --PCI Express Root Port 4 <Disabled><Enabled> Enabled > LAN3 I210AT --PCI Express Root Port 5 <Disabled><Enabled> Enabled > LAN4 I210AT --PCI Express Root Port 6 <Disabled><Enabled> Enabled >...
  • Page 102 BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries Vcore (0.880 V) (4.978 V) +12V (12.320 V) VDDQ (1.184 V) VBAT (2.976 V) 3VSB (3.296 V) Temperature System (oC/oF) xx.x C/ xx.x F CPU (oC/oF) xx.x C/ xx.x F Fan Speed CPU FAN (RPM)
  • Page 103 BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries ---Enter New Password Again: ----Set All Hdd Password ---Enter New password: ---Enter New Password Again: ----Set All Master Hdd Password ---Enter New password: ---Enter New Password Again: >...
  • Page 104 BIOS Settings Overview BIOS Function Default Factory Setting System or BIOS specific entries Load Optimal Defaults <Yes><No> Discard Changes <Yes><No> Administer Secure Boot System Status: Secure Boot Database Unlocked Secure Boot Status Disabled User Customized Security Options: > Select a UEFI file as trusted for execution Enforce Secure Boot<Disabled><Enabled>...

  • Page 105: Trouble-Shooting

    Trouble-shooting Trouble-shooting IND101744-1 rev 05 - 03 Sep 2015 - 6987/6923/363 GENERAL TROUBLE-SHOOTING RECOVERY IMAGE - QUICK START RECOVERY IMAGE The Recovery Kit (USB Flash) will restore the HDD/SSD partition back to factory default overwriting all current data available on the HDD/SSD device. The recovery image is located either on a hidden partition image located on the computer unit (depending on product) or it is included as a image on the USB Flash Kit supporting all Computers and Maritime Panel Computers (MMC) models from Hatteland Technology.

  • Page 106: Bios Hot-Keys Functions

    Trouble-shooting BIOS HOT-KEYS Functions To enter BIOS Setup on HT B30 computers, press DEL on keyboard. To enter BOOT Manager on HT B30 computers, press F11 during early boot. Appendix IND100077-187...

  • Page 107: Notes

    Notes General Notes: - License Terms for the installed OEM Operating System (OS) can be found in the following default factory paths: Note: This is a general listing for a varity of OS’s Hatteland Technology can factory install depending on unit. Please check specification for your unit to verify type of OS installed in order to retrieve the license terms.

  • Page 108: Declaration Of Conformity

    Declaration of Conformity We, manufacturer, Hatteland Technology AS, Eikeskogvegen 52, N-5570 Aksdal, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HD MVD, HM MMD, HM XRD, HM RMD, HT MMC, HD MMC and HT/HM (computers) product ranges is in conformity with the following standards in accordance with the EMC Directive.

  • Page 109: Return Of Goods Information

    Return Of Goods Information Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Technology referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaluation or products subject for credit, you must ensure that all accessories received from our warehouse are returned.

  • Page 110: General Terms And Conditions

    General Terms and Conditions As of January 2015, Hatteland Technology AS’ “Terms of Sales and Delivery” and “Warranty Terms” have been substituted by the updated ”General terms and conditions for sale of goods and performance of additional services” (the “General Terms and Conditions”). Further, from January 2015 onward, the previous “Terms of Sales and Delivery”...
  • Page 111 User Notes Appendix IND100077-24...

  • Page 112: Revision History

    Revision History Rev. Date Notes 00_01 01 Mar 2018 Internal review release. Preliminary version 00_02 07 Jun 2018 Revised after internal reviews. 00_03 TØ 31 Aug 2018 Revised after internal reviews R&D 00_04 17 Sep 2018 Revised after internal reviews 19 Sep 2018 Version 1 for internet release.
  • Page 113 Revision History IND100077-178...
  • Page 114 Hatteland Technology AS | www.hattelandtechnology.com | Enterprise no: NO974533146...

This manual is also suitable for:

Hatteland ht b30k stc e series

Table of Contents