Advertisement
Quick Links
Congratulations!
You are the proud owner of the Highlander ATV Trailer. Your Highlander is partially knocked-
down for easy shipment, Assembly is required. Follow the simple instructions inside.
Save this brochure - DO NOT DISCARD.
DO NOT RETURN TO THE MERCHANT
TO OBTAIN PARTS THAT WILL BE SENT TO YOU FREE OF CHARGE,
PLEASE CALL OUR HELP LINE
1 Year Limited Warranty
Required Tools
• M13 Wrench
• M17 Wrench
• M22 Wrench
• Vice Grips
• 10 mm Drill bit
Assembly Instructions
& Operations Handbook
BROKEN OR MISSING PARTS?
QUESTIONS?
1-800-665-7487
• M19 Wrench
• Drill
info@eqnx.biz
OR BY E-MAIL AT
Advertisement
Summary of Contents for Equinox Systems Highlander XL TRF
- Page 1 Assembly Instructions & Operations Handbook Congratulations! You are the proud owner of the Highlander ATV Trailer. Your Highlander is partially knocked- down for easy shipment, Assembly is required. Follow the simple instructions inside. Save this brochure - DO NOT DISCARD. BROKEN OR MISSING PARTS? QUESTIONS? DO NOT RETURN TO THE MERCHANT...
- Page 2 Part # Description Quantity TRAILER BODY – Highlander XL 18” Turf Tire and Rim Hitch Bar Channel Axle Body Support Brackets Ball Coupler Tipper Latch Frame Support Brackets M8 x 25mm Hex Head Bolts M8 Washers M8 Lock Nuts Cotter Pins M12 x 85 mm Hex Head Bolts M10 x 80 mm Hex Head Bolts M10 x 70 mm Hex Head Bolts...
- Page 3 Stage 1: T Frame Assembly For this stage you will require: (1) Channel (1) Axle (4) Frame Support Brackets (8) M10 x 80 mm Hex Head Bolts (16) M10 Washers (8) M10 Lock Nuts (4) M8 x 25 mm Hex Head Bolts (8) M8 Washers (4) M8 Lock Nuts (2) Body support Brackets...
- Page 4 Stage 2: Attaching Frame to Body For this stage you will require: (1) Frame Assembly (from Stage 1) (1) Body (6) M10 x 25 mm Carriage Bolts FIGURE 1 (6) M10 Washers (6) M10 Lock Nuts FIGURE 1 FIGURE 3 Turn the Highlander body upside down to begin installation.
- Page 5 NOTE: Make sure the Frame Support Brackets are correctly On the outside of the Body/Frame Support Bracket place an aligned on the Body before drilling. M10 washer on the bolt and secure with an M10 Lock Nut. For the hole in the Frame Support Bracket marked position TIP: You can hold the Carriage Bolt on the underside using C in figure 3, use a 10 mm drill bit to drill a hole through the the tip of a pair of pliers.
- Page 6 Stage 3: Attaching Wheels For this stage you will require: (1) Frame Assembly (from previous stage) (2) Tire and Rim (2) Cotter Pins FIGURE 9 FIGURE 10 FIGURE 11 Place wheels on each spindle with Ensure both tabs of the cotter pins are separated after placement. the grease nipple facing inwards.
- Page 7 Warranty Information Equinox recreational division is committed to producing high quality components and stands behind all our products. Equinox guarantees that all products will leave our building free from manufacturer’s defects for the time period listed on our product warranty. What does this warranty not cover? How can you get warranty service? Any defect caused by abuse, misuse, neglect, carelessness,...
- Page 8 BROKEN OR MISSING PARTS? QUESTIONS? DO NOT RETURN TO THE MERCHANT TO OBTAIN PARTS THAT WILL BE SENT TO YOU FREE OF CHARGE, 1-800-665-7487 info@eqnx.biz PLEASE CALL OUR HELP LINE OR BY E-MAIL AT Toll Free (U.S.A.): 1-800-563-3352 Toll Free (Canada): 1-800-665-7487 Fax: (204) 694-7133 E-mail: info@eqnx.biz www.eqnx.biz...