Pentair Pool Products Kreepy krauly Platinum LL505PM Installation And User Manual page 15

Cutting the Feed Hose, (Continued)
9. Put extra mender nut on the Kreepy Krauly
™
Platinum mast and push soft hose gently over
mast at 1/2 in., turn mender nut around soft
hose tight.
Note: The Back-Up Valve still should be 30 in.
from the head of the cleaner.
10. Now take the bag, 360002/360009, out of the
box and fi rmly twist lock the bag onto the top of
the Kreepy Krauly
debris valve.
11. Review and check list: Hoses cut properly and fl oats evenly spaced. Mender nuts
tight around swivels, back up valve, Kreepy Krauly
Make sure wall fi tting is securely locked into place.
12. Lower your complete Kreepy Krauly
It should look like illustration below:
FIRST
SWIVEL
SHORT
WHITE
HOSE
13. Go back to your equipment and turn fi lter pump on fi rst (wait 30 seconds to force
air out of the hose), then turn booster pump on.
14. For large pools requiring more hose length you will need to purchase one (1)
additional hose (LLD45-White or LLD45PM-Grey), four (4) fl oats (ED10P-White
or LLD10PM-Grey), one (1) swivel (ED05-White or LLD05PM-Grey), and two (2)
mender nuts (ED15-White or LLD15PM-Grey).
15. Attach extra hose between long hoses using fl oats, swivel and mender
nuts. Divide extra hose overage by three (3) this time to keep all hoses the
same length.
® Platinum ™ throat over rubber
®
Platinum
SECOND
SWIVEL
LONG
WHITE
HOSE
®
FEED MAST
® ™
Platinum mast and wall fi tting.
™
assembly into your pool carefully.
THIRD
SWIVEL
LONG
WHITE
HOSE
CLEAR
HOSE
Kreepy Krauly ® Platinum ™
FEED HOSE
MENDER NUT
BACK UP
VALVE
Installation and User's Guide
7