Select Direction Of Rotation; Preselecting The Rotation Speed; Maintenance And Cleaning - Parkside PSBM 750 B2 Translation Of The Original Instructions

Select direction of rotation

WARNING!
► The rotation direction switch
be used/adjusted if the appliance is at a
standstill .
♦ Select the direction of rotation by pressing the
rotation direction switch
right .

Preselecting the rotation speed

You can use the rotational speed preselector
adjusting wheel
speed . The speed you select depends on the
material to be processed . Work out the right
setting by carrying out a practice test .:
NOTE
► The appliance only reaches the set rotational
speed during continuous operation .
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch
Switching the appliance off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch
again .
PSBM 750 B2
may only
towards the left or
to preselect the rotational
.
.
. Lock it in the
and release it

Maintenance and cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and re-
move the power plug before start-
ing any work on the appliance.
■ Never permit liquids to penetrate inside the
appliance .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■ Always clean the appliance after completion
of work .
■ Store the appliance in a dry place .
WARNING!
► If the connecting cord needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline .
GB │ IE │ NI │ CY │ 7 ■