Whirlpool GHW9100L Service Manual page 41

Water Inlet Solenoids
Drain Pump Motor
Door Lock/Unlock Solenoids
Door Lock Main Switches
To check the door lock main switches, the door must be locked. Begin by selecting a cycle and
press START. You will hear the door lock solenoid engage. Unplug the washer from the wall
outlet and check for continuity at the following points.
Hot Water Solenoid
Cold Water Solenoid
Test Points
2 to 1
Unlock Solenoid
Lock Solenoid
Main Switch 1
Main Switch 2
5 - 3
Test Points
7 to 5
3 to 1
Reading
15 ohms
Test Points
3 to 2
3 to 1
Test Points
5 to 4
2 to 1
Reading
800 ohms
800 ohms
Reading
60 ohms
60 ohms
Reading
0 ohms
0 ohms