Advertisement
7
STEM
NAVI MODE
If the MODE key is pressed, the mode can be changed to a different mode.
R UN mode
s
Press
menu
DIST mode (Note 1)
etting
Press
HOLD mode (Note 2)
e.
Press
r
d period
TIMER mode (Note 3)
removal
ion.
ns are
ing),
Press
CUST mode
ed,
ay
t.
gital
y)
Press
PR O mode
Press
Notes:
1)
For details, refer to '
2)
The values that are displayed during RUN mode will vary as shown in the table below
depending on the setting for HOLD mode. (A ' ' against the displayed value means that
Press:
the value is negative.)
Confirmed
HOLD mode setting
hold
3)
If HOLD mode is set to '
set to '
' (no timer), and it will not be possible to change timer operation.
4)
When charge removal time measurement has been selected, the output operation will be
e).
without timer.
8
SETTING RANGE
1
The threshold value can be set to within the following range.
Distance 8 to 20.5mm : +5
( 1 kV range)
Distance 21 to 100mm: +5
ust
( 2 kV range)
0-adjust can be set to within the following range.
d as
-200
Measurement value
ried
Calibration can be set to within the following range.
0.5
(Display hold value / Current measurement value)
Distance 8 to 20.5mm : -1,000
Distance 21 to 100mm: -1,999
ed
d.
or
FF.
n
ce
the
.
ec.
m
ble
Ramco National
Refer to '
R UN
MODE'.
6
T urn
1kV range
/
Setting distance range 8 to 20.5mm
2kV range
/
Setting distance range 21 to 100mm
Measurement distance: Set to 0.5mm or
1mm pitch
:Confirmed
Measurement range: Set automatically in
accordance with measurement distance
No hold
T urn
Peak hold measurement
Peak hold measurement
Peak hold measurement
:Confirmed
Without timer
OFF delay timer / Timer period
T urn
ON delay timer / Timer period
ONE-SHOT delay timer / Timer period
Charge removal time measurement (Note 4)
:Confirmed
:Variable timer period
Calibration
Refer to ' PRO MODE / PRO1 mode setting'.
9
Response time change function
Refer to ' PRO MODE / PRO1 mode setting'.
9
T urn
Analog output focus
Refer to ' PRO MODE / PRO1 mode setting'.
9
Data bank load setting function
Refer to ' PRO MODE / PRO3 mode setting'.
9
Code setting function
Refer to ' PRO MODE / PRO5 mode setting'.
9
This displays the items that have been set using PRO5
mode and CUST mode display functions, and the set-
tings for these items can be changed.
Refer to '
PR O
MODE'.
9
8
SETTING
RANGE'.
Display value during R UN mode
Threshold value / Measurement value
Threshold value / Peak value
+ peak value / - peak value
Peak value / Measurement value
', '
' or '
', the timer function will be automatically
+Threshold value
+500
-5
-Threshold value
-500
+Threshold value
+1,000
-5
-Threshold value
-1,000
+200
10
Measurement value
+1,000
Measurement value
+1,999
9
PRO MODE
If 'PR O' is selected in NAVI mode, the mode changes to PR O mode.
Basic system of operation for PRO mode
PRO1
PRO2
PRO3
PRO4
(The display will not change even when the jog switch is operated.)
PRO5
PRO6
PR O1 mode setting
Press
T urn
Note:
If a focus has been set for analog output, the resolution will change.
800-280-6933 | nsales@ramcoi.com
Response time change
Switches among response times.
Sets hysteresis.
Analog output focus
This sets the focus for analog
This calibrates the measurement
output.
values.
Display turning
Sets the viewing orientation of
Sets the digital display to turn
the digital display.
ON/OFF.
Stored value display
This simultaneously displays the
Select threshold value display /
stored measurement value and
symbol display for left digital dis-
the current measurement value.
play.
Current value save
This saves the current measure-
Select whether least significant
ment value.
digit is displayed / not displayed.
Data bank load
Loads configuration setting from
Saves configuration setting from
the data bank.
the data bank.
Coding
Allows basic configuration infor-
All settings, except for data bank,
mation to be set in a single step,
revert to factory settings.
by inputting a 8-digit code.
Selects a function in CUST mode
to display.
Output mode
If window comparator mode / 2-output
This selects normal open or
mode is selected, threshold value
normal close as the output.
setting is carried out.
Select the external input function.
(Timing input / 0-Adjust)
Response time
Response time
10ms
change function
Press
20ms
100ms
200ms
400ms
800ms
T urn
T urn
Hysteresis
0.2% of measurement range
0.5% of measurement range
Hysteresis
1% of measurement range
function
Press
2% of measurement range
4% of measurement range
T urn
T urn
Current
measurement
value
(Calibration)
Press
Press
Current value is displayed as expected value.
T urn
Current value is displayed as 1,000 or -1,000.
T urn
Only calibration is reset.
Analog
(Note)
Focus
output focus
Press
None
x2
x5
x10
T urn
Analog output
www.panasonicsensors.com
Hysteresis
Calibration
ECO mode setting
Symbol display setting
Display unit setting
Data bank save
Reset
CUSTOM mode display
Output form
External input setting
1kV range
2kV range
2
4
5
10
10
20
20
40
40
80
Expected display
value
1kV range
2kV range
-1,000 to +1,000
-2,000 to +2,000
-500 to +500
-1,000 to +1,000
-200 to +200
-400 to +400
-100 to +100
-200 to +200
+1 to +5V
+1 to +5V
Advertisement
