Specifications Of Camera Parts; Front/Top/Bottom - Primetech PXA30SHE Operation Manual

9

4. Specifications of Camera Parts

4.1.

Front/Top/Bottom

[1] Lens mount (C-mount)
Attach a C-mount lens or other optical equipment.
Caution
Use a C-mount lens that does not project more than 9 mm from the lens mount surface.
Be careful to select the lens to attach the camera, as the resolution of the video output from the camera may differ
depending on the lens performance. Moreover, the lens performance may vary depending on the aperture value even with
a single lens. When sufficient resolution is not attained, change the aperture value.
[2] Auxiliary screw hole for fixing camera (top)
[3] Auxiliary screw holes for fixing camera/screw holes for installing tripod (bottom)
When using a tripod, use these 4 holes to attach a tripod adaptor.
[4] Reference screw holes for fixing camera (bottom)
These holes are used to fix the camera module. Fix the camera module using these holes to minimize the deviation of
the optical axis.
Installing a tripod
Install the tripod adaptor (separately sold) onto the camera module before attaching the module to the tripod.
Use a screw that protrudes from the installation surface by 5 mm maximum (ℓ) and firmly tighten it using a hand driver.
Ensure that the protrusion never exceed 5 mm.
Caution
When installing a tripod adaptor (separately sold), be sure to use the screws provided with the adaptor.
[1] Lens mount (C-mount)
[2] Auxiliary screw hole for fixing camera
(top)
[3] Auxiliary screw holes for fixing camera/
screw holes for installing tripod (bottom)
[4] Reference screws hole for fixing
camera (bottom)
9/30
PRIMETECH ENGINEERING