External Trigger Shutter Speed Setting According To Trigger Pulse Width - Primetech PXA30SHE Operation Manual

13
4.7. Externally triggered shutter speed setting according to trigger pulse width
Set all DIP switches 1 to 4 on the rear panel to "0".
Setting the trigger pulse width within the range from 2 s to 250 ms will achieve an arbitrary shutter speed.
Shutter speed: trigger pulse width
Trigger pulse width + 97 sec
Caution
• DIP switch 5 is optional, but field (FL) setting is recommended. The field setting can obtain about twice the sensitivity
compared with the frame (FR) setting. next trigger is input before the video output corresponding to the latest trigger is
finished, the video is affected.
• If the next trigger is input before the video output corresponding to the latest trigger is finished, the video is affected.
Mode 1 Mode 2
13/30
PRIMETECH ENGINEERING