Table of Contents
Advertisement
RC-Link
English
With certain constellations (e.g. when the detectors are located in
different booster sections reacting in varied ways to short circuit
messages) suppressing the disengaged reports at a voltage break down
can be unnecessary or disturbing. When performing functional tests
connecting the RC-Link to the rails may involve a high effort.
For that reasons it is possible to do without connecting the RC-Link to
the rails as well. With an open track port (and thus supposed broken
down track voltage) the RC-Link however supresses the transfer of
disengaged reports, which is unwelcome in this constellation. That is
why in this case a track voltage being applied has to be simulated by
shunting a connection on the module with a jumper.
Page 9
Advertisement
Table of Contents
