What Happens In; Each Cycle; Magic Clean*; Lint Filter - Whirlpool 6LBR6233BQ0 Use And Care Manual

What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills
(to selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling (agitation occurs
with the washer lid up or down). After
agitation starts, the Cycle Control Knob
turns clockwise until it points to OFF and
the cycle ends.
NOTES:
. A Gentle Wash system helps protect your
fabrics by reducing wash agitation speed
during the last few minutes of wash
agitation in the Regular and Permanent
Press cycles.
l
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
WASH
RINSE
w
4
Fill
Wash selected time
Drain+
No agitation
+The Permanent Press cycle partially
drams, fills, agitates briefly, and drains.
Soin
w
4
Fill
1;
w
II
Rinse
L4
-e- Drain-No agitation
IT-J
5T!i!z
Spin-Spray rinse
LJ &
Spin
In]
Off
MAGIC CLEAN* lint filter
The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash
and rinse water pass over the filter, separat-
ing the lint from the water. The lint is then
spun away from the filter and out of the
system during the spin part of the cycle.
If your washer drains into a tub, remove
any lint collected in the tub or strainer.
MAGIC CLEAN
Basket
lint filter
interior
9