D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor. D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
Page 3
WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and result in fire or explosion and serious injury. D Ground the equipment and the object being sprayed. See Ground the System on page 4. D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvent or the fluid being sprayed.
Installation D Install a fluid filter and drain valve close to the General pump’s fluid outlet. The fluid filter helps prevent the NOTE: Reference numbers and letters in parentheses spray tip from clogging with particles from the fluid. in the text refer to the callouts in the Parts Drawing. D Install a fluid pressure regulator to control pressure WARNING to the gun.
Operation Pressure Relief Procedure Gun Operation WARNING WARNING INJECTION HAZARD INJECTION HAZARD To reduce the risk of property damage or Fluid under high pressure can be in- serious injury, including fluid injection: jected through the skin and cause D keep your fingers, hands, and body away from serious injury.
Service Air is Leaking Around the Air Valve Fluid is Leaking Around the Packing Nut Notes: WARNING D Try tightening the packing nut (23) first. If that does not resolve the problem, repack the gun as To reduce the risk of serious injury whenever you instructed below.
Parts Model 204000, Series J †5 Includes items 1 to 34 †4 ‡32 ‡31 6† ‡11 3‡ †26 10‡ 5† 30*† 33*† 34*† 06475 27† 15‡ 6† 25† Part No. Description Qty. Part No. Description Qty. 203953 LOCK SCREW; trigger 160235 AIR CONTROL HOUSING 101543...
Technical Data Category Data Length 8 in. (203 mm) Height 8.25 in (210 mm) Weight 3.5 lbs (1.6 Kg) Maximum Air Working Pressure 100 psi (0.7 MPa) (7 bar) Maximum Fluid Working Pressure 2000 psi (14.0 MPa) (140 bar) Maximum Fluid Working Temperature 120_ F (49_ C) Wetted Parts Aluminum, Stainless Steel, Steel, Leather, Delrin...
Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.