Table of Contents
Advertisement
6) Cutting
a.
Finish sketch.
b. Right click on sketch and select properties.
c.
Line Type: Continuous
d. Line Weight: .001 in.
e.
Set color to match one of the 16 colors available in the pen tab of the windows driver.
NOTE
All objects created in one particular sketch will have the same properties meaning all will engrave
or all will cut. If you would like to engrave and cut in the same job you will need at least two
sketches, one with all the engravings and another with all the cuts, to do so properly.
67
Advertisement
Table of Contents
