Table of Contents
Advertisement
5.2.1 Page Setup and Orientation
The first thing you must do before working with the LV-290 Printer Driver will be to make sure the page and layout
settings are properly configured within your graphics software. You will need to access and edit the Page Setup or
Layout page of your graphics software to set your graphics software's page layout to match this machine's work
table's dimensions and orientation.
From your graphic software's Page Setup page:
•
Set the page orientation in the graphics software to Landscape mode.
•
Set page size to match laser machine work area size.
LV-290: 640x460 mm (25.19"x18.11") or 740x460 mm (29.13"x18.11") with extended mode
CorelDRAW Example (Page Setup and Orientation)
The following is an example of how to set the Page Setup and Orientation in the graphics software.
CorelDRAW is the designated graphics software used for this example. For another graphics software, you
will need to access the corresponding Page Setup page.
1)
From the primary menu, click LAYOUT → PAGE SETUP.
2)
From the navigation bar on the left, click DOCUMENT → PAGE → SIZE.
3)
Ensure that NORMAL PAPER and LANDSCAPE are selected.
4)
Ensure the Paper Width and Height dimensions match the LV-290 work area dimensions.
LV-290: 640x460 mm (25.19"x18.11") or 740x460 mm (29.13"x18.11") with extended mode
5)
Click OK to end the paper size adjustment.
Tip
Instead of manually selecting the Landscape and setting the Paper Width and Height, you can simply
click the Set from Printer function and CorelDRAW will automatically set the proper orientation and
dimensions based on this machine's work table. (You MUST have the LV-290 set as the default printer
prior to doing this.)
105
Advertisement
Table of Contents
