Assembling The Battery - Stihl AR 900 Instruction Manual

During Operation
WARNING
The battery is equipped with an acoustic
signal. Your ability to hear the acoustic
signal may be reduced when wearing
hearing protection.
The battery is carried as a backpack.
The battery is designed to be operated
by one person only. Do not allow other
persons in the work area.
Make sure you always have good
balance and secure footing.
Never work with the battery in trees, on
roofs or on a ladder.
AR 900
Make sure the cable cannot become
entangled or snag on objects – position
and secure the cable carefully before
starting work.
If the battery is subjected to unusually
high loads for which it was not designed
(e.g. heavy impact or a fall), always
check that it is in good condition before
continuing work – see also "Before
Starting Work". Do not continue
operating the battery if it is damaged. In
case of doubt, contact your STIHL
servicing dealer.
After Finishing Work
Clean the battery – see "Cleaning the
Battery".
Further Safety Precautions
see www.stihl.com/safety-data-sheets

Assembling the Battery

Connecting the Adapter
Remove the cover (1) – press the
N
tabs (arrows) inwards and push the
cover upwards.
3
2
Insert the plug (2) in the socket (3) –
N
line up the lugs on the plug with the
slots in the socket.
English
5