Download Print this page

Preparing The Double-Battery Compartment For Operation; Displaying The Charge State And Leds - Stihl ADA 700 Instruction Manual

Hide thumbs Also See for ADA 700:

Advertisement

5 Preparing the Double-battery Compartment for Operation

► If the battery is stored in the charger, dis‐
connect the mains plug and store the bat‐
tery at a state of charge between 40% and
60% (2 lit green LEDs).
► Do not store the battery outside of the
specified temperature limits,
4.9
Cleaning, Maintenance and
Repair
WARNING
■ Abrasive cleaning agents, using a water jet for
cleaning or sharp objects may result in dam‐
age to the double-battery compartment and
battery. If the double-battery compartment or
battery are not cleaned correctly, components
may no longer operate correctly and safety
devices may be disabled. This may result in
serious injury to people.
► Clean the double-battery compartment and
battery as described in this instruction man‐
ual.
■ If the double-battery compartment or battery
are not maintained or repaired correctly, com‐
ponents may no longer operate correctly and
safety devices may be disabled. This may
result in serious or fatal injury to people.
► Do not maintain or repair the double-battery
compartment or battery yourself.
► If the double-battery compartment or bat‐
tery need to be maintained or repaired: con‐
sult a STIHL specialist dealer.
5
Preparing the Double-bat‐
tery Compartment for
Operation
5.1
Preparing the Double-battery
Compartment for Operation
The following steps must be performed before
commencing work:
► Check the battery,
► Charge the battery fully as described in the
instruction manual for the STIHL AL 101, 301,
301-4, 500 charger.
► Clean the double-battery compartment,
13.1.
► Make sure that the following components are
in safe condition:
– Double-battery compartment,
– Battery,
4.5.2.
► If the steps cannot be performed: do not use
the double-battery compartment and consult a
STIHL specialist dealer.
0478-909-9930-C
16.2.
9.1.
4.5.1.
5.2
Connecting a battery with Blue‐
tooth
radio interface with the
®
STIHL connected app
► Activate the Bluetooth
mobile device.
► Activating the Bluetooth
the battery,
7.1.
► Download the STIHL connected app to the
mobile device from the App Store and create
an account.
► Open and sign in to the STIHL connected app.
► Add the battery in the STIHL connected app
and follow the instructions on the screen.
For contacts and other information, please visit
https://support.stihl.com or see the STIHL con‐
nected app.
The STIHL connected app is available interna‐
tionally.
6
Displaying the Charge
State and LEDs
6.1
Displaying the Charge State
► Press button (1).
The LEDs illuminate green for approx. 5 sec‐
onds to indicate the charge state.
► If the right LED flashes green: charge the bat‐
tery.
6.2
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
15.
There is a malfunction in the cordless product
or battery.
English
®
radio interface on the
®
radio interface on
17

Advertisement

loading