State Of Charge; Leds And Beeps; Assembling The Battery; Fitting The Connecting Cable - Stihl AR 1000 Instruction Manual

7 Assembling the Battery

► Insert the battery cable plug (1) in the socket (2) on the AP
adapter (3).
► Insert the AP adapter (3) in the guides in the charger (5)
and press it home as far as stop.
The LED (4) glows green. The LEDs on the battery glow
green and the battery is charged.
► If the LED (4) and the LEDs on the battery stop glowing:
Disconnect the plug (7) from the wall outlet (8).
Battery is fully charged.
► Remove the AP adapter (3).
6.2

State of Charge

► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge. There is a short beep.
► If the right-hand LED flashes green and there are four long
beeps: Charge the battery.
6.3

LEDs and beeps

The LEDs and beeps can indicate the battery's state of
charge or malfunctions. The LEDs can glow or flash green
or red. Beeps may be short or long.
The state charge is indicated when the LEDs glow or flash
green and there is a short beep.
► If the right-hand LED flashes green and there are four long
beeps: Charge the battery.
0458-794-9921-C
100 % 0 %
► If the LEDs glow or flash red or there are no beeps: Rectify
the malfunction.@ 17
There is a malfunction in the cordless product or battery.
► If the four right-hand LEDs on the battery flash red and
short beeps sound in quick succession: Troubleshooting,
@ 17.
There is a malfunction in the battery.
7 Assembling the Battery
7.1

Fitting the Connecting Cable

1
► Pull off the cover (1).
► Pass the plug (3) through the opening in the backplate.
► Hold the plug (3) so that its lug lines up with the recess in
the socket (2).
► Insert the plug (3) in the socket (2) and turn it clockwise.
The plug engages with an audible click.
► Refit the cover (1).
English
2
3
9