Led Diagnostics; Leds On The Charger; Mounting And Removing A Cutting Attachment; Mounting The Cutting Attachment - Stihl HSA 25 Instruction Manual

12 LED Diagnostics

12 LED Diagnostics

12.1 LEDs on the Charger

Two LEDs show the status of the charger and the battery.
The LEDs can glow or flash green or red.
Left LED
If the LED glows red continuously: the battery is
too hot or too cold for charging. Allow the battery
to warm up or cool down gradually at an ambient
temperature of about 50 °F to 68 °F (10 °C to
20 °C).
If the LED flashes red: the battery or the charger
has a malfunction.
Right LED
If the LED flashes green: the battery is being
charged.
If the LED glows green continuously: the battery
is fully charged.
For more information, @ 23.
0458-708-8221-A
13 Mounting and Removing a Cutting
Attachment

13.1 Mounting the Cutting Attachment

WARNING
Make sure the battery is removed before starting assembly.
WARNING
Making contact with the cutters may result in serious cut
injuries, even if the cutting blades are not moving. @ 6.5.
Always wear heavy-duty work gloves when mounting or
otherwise handling the cutting blades, @ 6.4.
The grass blades and shrub blades are mounted to the
garden shears in the same way.
To mount the cutting blade:
► Switch off the garden shears, @ 15.2.
► Remove the battery, @ 14.2.
► Slide a blade scabbard over the cutting blades so that it
covers the entire cutting attachment.
1
1
2
2
► Insert the clips (1) of the cutting attachment into the
guides (2) on the garden shears.
► Move the other end of the cutting blade downward and
press firmly until you hear an audible click.
► Remove the blade scabbard (4).
English
3
4
21