Stihl FSB-KM Instruction Manual page 14

English
Turn the mowing head (1) clockwise
N
until it engages the shaft (2)
Block the shaft, see "Blocking the
N
shaft"
Tighten the mowing head (1)
N
NOTICE
Remove the tool again used to block the
shaft.
Removing the mowing head
Block the shaft, see "Blocking the
N
shaft"
Turn the mowing head
N
counterclockwise
12
STIHL PolyCut 6-3
1
10
2
Push thrust plate onto the shaft
N
Insert the nut (10) into the mowing
N
head
Turn the mowing head (11)
N
clockwise until it engages the shaft
(5)
Block the shaft
N
Tighten the mowing head
N
WARNING
Nuts that move too easily must be
replaced.
NOTICE
Remove the tool again used to block the
shaft.
11
5
Removing the mowing head
Block the shaft, see "Blocking the
N
shaft"
Turn the mowing head
N
counterclockwise
FSB-KM